A research on the evaluation of grindability of fine-ceramics by constant pressure grinding (1st report) -formulation of the removal rate in case of ductile mode and brittle mode grinding

Takekazu Sawa, Yasuyuki Nagato, Yasushi Ikuse, Kuniaki Unno

研究成果: Article査読

抄録

The grindability of fine-ceramics is most important information in order to determine the optimum grinding conditions. This study proposes the method of grindability evaluation of fine-ceramics by removal rate in constant pressure grinding. The processing model under the constant pressure grinding was composed, and the removal rate was formulated from this processing model. As a result, the removal rate calculated from the processing model is well correspondent with the removal rate obtained by the experiment. From this result, the possibility of evaluating the grindability from the mechanical properties of fine-ceramics was found.

本文言語English
ページ(範囲)247-251
ページ数5
ジャーナルSeimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering
74
3
DOI
出版ステータスPublished - 2008 3

ASJC Scopus subject areas

  • Mechanical Engineering

フィンガープリント 「A research on the evaluation of grindability of fine-ceramics by constant pressure grinding (1st report) -formulation of the removal rate in case of ductile mode and brittle mode grinding」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル