A research on the evaluation of grindability of fine -ceramics by constant pressure grinding (3rd Report) -Influence of particle diameter on grindability and formulation of the removal rate

Takekazu Sawa, Yasushi Ikuse, Kuniaki Unno

研究成果: Article

抜粋

The grindability of fine-ceramics is the most important information in order to determine the optimum grinding conditions and dressing intervals. This study proposed the method of grindability evaluation of fine-ceramics by using removal rate in constant pressure grinding. In this paper, constant pressure grinding of four kinds of alumina in which particle diameter differs was performed. And, the influence of particle diameter on removal rate was examined. As a result, it found that the removal rate increases by the 0.5th power of particle diameter based on the Griffith theory. Then, the removal rate in consideration of particle diameter was formulated based on this experimental result. The calculated removal rate was well corresponding to the removal rate obtained by experiments. From these results, the possibility of evaluating the grindability from both mechanical properties of fine-ceramics and particle diameter was found.

元の言語English
ページ(範囲)463-467
ページ数5
ジャーナルSeimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering
76
発行部数4
DOI
出版物ステータスPublished - 2010 4
外部発表Yes

ASJC Scopus subject areas

  • Mechanical Engineering

フィンガープリント A research on the evaluation of grindability of fine -ceramics by constant pressure grinding (3rd Report) -Influence of particle diameter on grindability and formulation of the removal rate' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用