Accuracy of AC transport current loss in HTS tape measurements using a pick-up loop

Jun Ogawa, Satoshi Fukui, Tetsuo Oka, Takao Sato, Atsushi Maruko, Hiroshi Tanaka

研究成果: Article

抄録

AC transport current loss in high temperature superconducting (HTS) tapes can be measured without a direct electrical connection by using a pick-up loop method. This method requires a correction factor, which is related to the ratio of the linkage magnetic flux determined by the distribution of the transport current in the HTS tape and pick-up loop. In this study, to determine the accuracy of the AC transport current loss measurement using a pick-up loop method, we measured the critical current and AC transport current loss distribution in the tape axis. We found the pick-up loop voltage of the deteriorated section of the HTS tape to be higher than in the normal section with the same transport current. We concluded that the pick-up loop method accuracy is sufficient to measure the AC transport current loss in HTS tapes.

元の言語English
記事番号5109567
ページ(範囲)2391-2394
ページ数4
ジャーナルIEEE Transactions on Applied Superconductivity
19
発行部数3
DOI
出版物ステータスPublished - 2009 6 1
外部発表Yes

Fingerprint

Superconducting tapes
tapes
alternating current
Temperature
Critical currents
Magnetic flux
Tapes
linkages
magnetic flux
critical current
Electric potential
electric potential

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics
  • Electrical and Electronic Engineering

これを引用

Accuracy of AC transport current loss in HTS tape measurements using a pick-up loop. / Ogawa, Jun; Fukui, Satoshi; Oka, Tetsuo; Sato, Takao; Maruko, Atsushi; Tanaka, Hiroshi.

:: IEEE Transactions on Applied Superconductivity, 巻 19, 番号 3, 5109567, 01.06.2009, p. 2391-2394.

研究成果: Article

Ogawa, Jun ; Fukui, Satoshi ; Oka, Tetsuo ; Sato, Takao ; Maruko, Atsushi ; Tanaka, Hiroshi. / Accuracy of AC transport current loss in HTS tape measurements using a pick-up loop. :: IEEE Transactions on Applied Superconductivity. 2009 ; 巻 19, 番号 3. pp. 2391-2394.
@article{42e40e5a334e4e4893642c001d80520d,
title = "Accuracy of AC transport current loss in HTS tape measurements using a pick-up loop",
abstract = "AC transport current loss in high temperature superconducting (HTS) tapes can be measured without a direct electrical connection by using a pick-up loop method. This method requires a correction factor, which is related to the ratio of the linkage magnetic flux determined by the distribution of the transport current in the HTS tape and pick-up loop. In this study, to determine the accuracy of the AC transport current loss measurement using a pick-up loop method, we measured the critical current and AC transport current loss distribution in the tape axis. We found the pick-up loop voltage of the deteriorated section of the HTS tape to be higher than in the normal section with the same transport current. We concluded that the pick-up loop method accuracy is sufficient to measure the AC transport current loss in HTS tapes.",
keywords = "AC transport current loss measurement, Correction factor, Pick-up loop method",
author = "Jun Ogawa and Satoshi Fukui and Tetsuo Oka and Takao Sato and Atsushi Maruko and Hiroshi Tanaka",
year = "2009",
month = "6",
day = "1",
doi = "10.1109/TASC.2009.2019546",
language = "English",
volume = "19",
pages = "2391--2394",
journal = "IEEE Transactions on Applied Superconductivity",
issn = "1051-8223",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
number = "3",

}

TY - JOUR

T1 - Accuracy of AC transport current loss in HTS tape measurements using a pick-up loop

AU - Ogawa, Jun

AU - Fukui, Satoshi

AU - Oka, Tetsuo

AU - Sato, Takao

AU - Maruko, Atsushi

AU - Tanaka, Hiroshi

PY - 2009/6/1

Y1 - 2009/6/1

N2 - AC transport current loss in high temperature superconducting (HTS) tapes can be measured without a direct electrical connection by using a pick-up loop method. This method requires a correction factor, which is related to the ratio of the linkage magnetic flux determined by the distribution of the transport current in the HTS tape and pick-up loop. In this study, to determine the accuracy of the AC transport current loss measurement using a pick-up loop method, we measured the critical current and AC transport current loss distribution in the tape axis. We found the pick-up loop voltage of the deteriorated section of the HTS tape to be higher than in the normal section with the same transport current. We concluded that the pick-up loop method accuracy is sufficient to measure the AC transport current loss in HTS tapes.

AB - AC transport current loss in high temperature superconducting (HTS) tapes can be measured without a direct electrical connection by using a pick-up loop method. This method requires a correction factor, which is related to the ratio of the linkage magnetic flux determined by the distribution of the transport current in the HTS tape and pick-up loop. In this study, to determine the accuracy of the AC transport current loss measurement using a pick-up loop method, we measured the critical current and AC transport current loss distribution in the tape axis. We found the pick-up loop voltage of the deteriorated section of the HTS tape to be higher than in the normal section with the same transport current. We concluded that the pick-up loop method accuracy is sufficient to measure the AC transport current loss in HTS tapes.

KW - AC transport current loss measurement

KW - Correction factor

KW - Pick-up loop method

UR - http://www.scopus.com/inward/record.url?scp=68649123996&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=68649123996&partnerID=8YFLogxK

U2 - 10.1109/TASC.2009.2019546

DO - 10.1109/TASC.2009.2019546

M3 - Article

AN - SCOPUS:68649123996

VL - 19

SP - 2391

EP - 2394

JO - IEEE Transactions on Applied Superconductivity

JF - IEEE Transactions on Applied Superconductivity

SN - 1051-8223

IS - 3

M1 - 5109567

ER -