Air flow optimization for energy efficient blower of biosafety cabinet class II A2

M. D. Ibrahim, M. Z. Mohtar, A. A. Alias, L. K. Wong, Y. S. Yunos, M. R.A. Rahman, A. Zulkharnain, C. S. Tan, R. Thayan

研究成果: Conference article査読

抄録

An energy efficient Biosafety Cabinet (BSC) has become a big challenge for manufacturers to develop BSC with the highest level of protection. The objective of research is to increase air flow velocity discharge from centrifugal blower. An aerodynamic duct shape inspired by the shape of Peregrine Falcon's wing during diving flight is added to the end of the centrifugal blower. Investigation of air movement is determined by computational fluid dynamics (CFD) simulation. The results showed that air velocity can be increased by double compared to typical manufactured BSC and no air recirculation. As conclusion, a novel design of aerodynamic duct shape successfully developed and proved that air velocity can be increase naturally with same impeller speed. It can contribute in increasing energy efficiency of the centrifugal blower. It is vital to BSC manufacturer and can be apply to Heating, Air Ventilation and Air Conditioning (HVAC) industries.

本文言語English
論文番号012022
ジャーナルJournal of Physics: Conference Series
822
1
DOI
出版ステータスPublished - 2017 4 11
外部発表はい
イベント15th Asian Congress of Fluid Mechanics, ACFM 2016 - Kuching, Sarawak, Malaysia
継続期間: 2016 11 212016 11 23

ASJC Scopus subject areas

  • 物理学および天文学(全般)

フィンガープリント

「Air flow optimization for energy efficient blower of biosafety cabinet class II A2」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル