Alkali metals impurities influence on the magnetic and electrical properties of YBCO

I. Nedkov, A. Veneva

研究成果: Article査読

14 被引用数 (Scopus)

抄録

The samples were prepared using the primary batch formula Y 1-0.2xBa2-0.2xCu3+0.3x(Me)0.4xO y, where x=0-1.20 and Me denotes alkali metals (Na, K, Rb) introduced as carbonates. The presence of alkali carbonates during the process allows one to influence the YBCO grain size and improve the homogeneity of the structure. Despite the large concentration range of additives in the initial batch after the second treatment at temperatures higher than 900°C, only traces of the alkali metals were revealed. The influence of Na, K, and Rb impurities in concentrations for Na about 5×10-1 wt %; for K to 4×10-2 wt %, and Rb to 2×10-2 wt % in polycrystalline YBCO was investigated. For Rb and K, the R(T) transitions were comparable to that of pure YBCO. The microwave surface resistance Rs was least influenced by the impurities, but strongly depended on the polycrystalline microstructure. Each impurity had a specific effect on χ(T) and Jc which are related to the grain-boundary structure.

本文言語English
ページ(範囲)6726-6728
ページ数3
ジャーナルJournal of Applied Physics
75
10
DOI
出版ステータスPublished - 1994
外部発表はい

ASJC Scopus subject areas

  • 物理学および天文学(全般)

フィンガープリント

「Alkali metals impurities influence on the magnetic and electrical properties of YBCO」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル