抜粋
Thin aluminum (Al) pipes filled with Al foam were fabricated by friction welding. In this study, thin Al pipes were formed from thin Al plates and were welded during the coating of a precursor by friction welding. It was shown that seamless Al foam-filled pipes with a uniform wall thickness can be realized. Compression tests on the Al foam-filled pipes revealed that the welding of the pipes had no effect on the generation of cracks in the pipes and their compression properties.
| 元の言語 | English |
|---|---|
| ページ（範囲） | 386-389 |
| ページ数 | 4 |
| ジャーナル | Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals |
| 巻 | 80 |
| 発行部数 | 6 |
| DOI | |
| 出版物ステータス | Published - 2016 |
フィンガープリント
ASJC Scopus subject areas
- Mechanics of Materials
- Materials Chemistry
- Metals and Alloys
- Condensed Matter Physics
これを引用
Hangai, Y., Nakano, Y., Utsunomiya, T., Kuwazuru, O., Kitahara, S., & Yoshikawa, N. (2016). Aluminum Foam-Filled Pipe Using Thin-Wall Aluminum Pipe Fabricated from Plate. Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals, 80(6), 386-389. https://doi.org/10.2320/jinstmet.J2016006