Autonomous navigation control of UAV using wireless smart meter devices

Kiyoshi Ueda, Takumi Miyoshi

研究成果: Article

2 引用 (Scopus)

抜粋

In preparation for the upcoming home delivery services that rely on Unmanned Aerial Vehicles (UAVs), we developed a new multi-hop radio network that is laid over a smart meter network transferring electric energy information only. In this network, a UAV follows, for navigation purposes, the topology of a virtual network overlaid on the physical smart meter network. We established a service management control method which does not rely on image analysis or map information processing, i.e. processes that consume precious power resources of the UAV. Instead, navigation is based on the routing technology. The current distance between the UAV and a node of the smart meter network is measured by means of the radio transmission loss value, therefore determining the position of the UAV. A two-layer network model has been proposed. One layer consists of a network of nodes in a residential area with scattered buildings - a location that is safer to navigate - while the other is an access network of nodes in a densely populated area. Then, we proposed methods to determine the direction of movement towards the next hop node on the data-link layer and the end node on the network layer, which is the target destination. We implemented a software-based test system and verified the effectiveness of the proposed methods.

元の言語English
ページ(範囲)64-72
ページ数9
ジャーナルJournal of Telecommunications and Information Technology
発行部数2
DOI
出版物ステータスPublished - 2019 1 1

ASJC Scopus subject areas

  • Computer Networks and Communications
  • Electrical and Electronic Engineering

フィンガープリント Autonomous navigation control of UAV using wireless smart meter devices' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用