Bending Deformation Behavior of Aluminium Extruded Various Sections with Laminated Elastic Mandrel on Draw Bending

Y. Okude, Shouichirou Yoshihara, A. Saito, B. J. MacDonald

研究成果: Article査読

6 被引用数 (Scopus)

抄録

During draw bending process of thin walled aluminum sections, undesirable deformations easily occur. To prevent and predict undesirable deformation of occurrence, it is necessary to generate much data from various forming configurations and draw bending process parameters. Therefore, it is necessary to clarify the relationship between the behavior of undesirable deformation and cross-sectional shape of workpiece. In this study, the draw bending simulations of workpiece with various cross sections were calculated by finite element analysis(FEA) to confirm the bending characteristics. And, the relationship between methods for preventing undesirable deformation and cross-sectional shape was clarified in the draw bending experiment.

本文言語English
ページ(範囲)4802-4811
ページ数10
ジャーナルMaterials Today: Proceedings
2
10
DOI
出版ステータスPublished - 2015 1 1
外部発表はい

ASJC Scopus subject areas

  • Materials Science(all)

フィンガープリント 「Bending Deformation Behavior of Aluminium Extruded Various Sections with Laminated Elastic Mandrel on Draw Bending」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル