既存杭の引抜孔を対象とした炭酸ナトリウム混合セメントベントナイト系充填材

Shinya Inazumi, Shuichi Kuwahara, Ko Hashimoto

研究成果: Article

抜粋

In a series of studies, it is aimed to develop fillings for holes formed by pulling-out piles. Cement-bentonite is used as a filling in general. Although cement-bentonite has an advantage of being able to perform blending according to circumstance of work on site, cement and water cause segregation, so uniform filling is difficult. In addition, there is a disadvantage that cement-bentonite cannot perform a predetermined strength when diluted by penetration of groundwater and so on. Sodium carbonate (Na2CO3) is a substance expected to suppress the segregation of cement-bentonite and to speed up the development of strength. In this study, we conducted an indoor mixing test on fillings mixed with Na2CO3 into cement-bentonite which is a mixture consisting of water, cement and bentonite, and examined various characteristics from the viewpoint of physical and chemical aspects. The following two points were clarified; (i) by mixing Na2CO3, bleeding of cement-bentonite is suppressed and (ii) by mixing Na2CO3, the strength development time of the cement-bentonite becomes faster and the long-term strength also increases. These two points are considered to be due to the improvement of the swelling property of bentonite, the early strength development of cement and the formation of calcium carbonate (CaCO3).

寄稿の翻訳されたタイトルCement-bentonite fillings mixing sodium carbonate for holes formed by pulling-out piles
元の言語Japanese
ページ(範囲)572-577
ページ数6
ジャーナルZairyo/Journal of the Society of Materials Science, Japan
68
発行部数7
DOI
出版物ステータスPublished - 2019

Keywords

  • Bleeding
  • Cement bentonite
  • Early strength
  • Sodium carbonate

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

フィンガープリント 既存杭の引抜孔を対象とした炭酸ナトリウム混合セメントベントナイト系充填材' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用