Characterization of net configurations for multichip modules

Takashi Okada, Toshio Sudo

研究成果: Conference contribution

1 被引用数 (Scopus)

抄録

An investigation of the design considerations for MCMs based on CMOS VLSI has been carried out with the aim of achieving a higher performance system. Included in the investigation were output driver and receiver characteristics and net configurations in MCM. Four MCM types have been introduced: MCM-D, MCM-Si, MCM-C, and MCM-L. Time domain analysis using the SPICE simulation program was carried out taking into consideration a lossy transmission line model. A simpler criterion for the critical damping condition and an estimation method for the signal delay of the network with a lumped circuit approximation is proposed to determine a preferable interconnect network including the output driver and the loads. The effect of the net configuration was also analyzed and the preferences among the net configurations have been represented with only two net parameters such as the total net length and the far-end length.

本文言語English
ホスト出版物のタイトルProceedings of the 1994 IEEE Multi-Chip Module Conference
編集者 Anon
出版社Publ by IEEE
ページ32-37
ページ数6
ISBN(印刷版)0818655623
出版ステータスPublished - 1994 1 1
イベントProceedings of the IEEE Multi-Chip Module Conference - Santa Cruz, CA, USA
継続期間: 1994 3 151994 3 17

出版物シリーズ

名前Proceedings of the 1994 IEEE Multi-Chip Module Conference

Other

OtherProceedings of the IEEE Multi-Chip Module Conference
CitySanta Cruz, CA, USA
Period94/3/1594/3/17

ASJC Scopus subject areas

  • 工学(全般)

フィンガープリント

「Characterization of net configurations for multichip modules」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル