Characterization of YBCO bulk superconductors for 100 kW h flywheel

K. Matsunaga, N. Yamachi, M. Tomita, M. Murakami, N. Koshizuka

研究成果: Conference article査読

10 被引用数 (Scopus)

抄録

We characterized YBCO bulk superconductors that will be installed in the radial type superconducting magnetic bearing module for a 100 kWh class flywheel system. The inner-stator is a cylinder with the outer diameter of 208 mm, the inner diameter of 180 mm, and the height of 100 mm. At present the stator is planned to consist of 24 and 16 YBCO plates. We measured the trapped magnetic-field distribution of the YBCO plates that will be installed in the stator by using Hall probes at 77 K after having been cooled in the presence of 1.5 T. The peak field values ranged from 0.82 to 0.87 T. The field distribution suggested that the YBCO plates were almost single domain. We also measured the repulsive force between the YBCO bulk at 77 K and a permanent magnet with the magnetic surface induction of 0.37 T. The repulsive force was about 50 N at 1.5 mm gap.

本文言語English
ページ(範囲)723-728
ページ数6
ジャーナルPhysica C: Superconductivity and its applications
392-396
PART 1
DOI
出版ステータスPublished - 2003 10月
外部発表はい
イベントProceedings of the 15th International Symposium on Superconduc - Yokohama, Japan
継続期間: 2002 11月 112002 11月 13

ASJC Scopus subject areas

  • 電子材料、光学材料、および磁性材料
  • 凝縮系物理学
  • エネルギー工学および電力技術
  • 電子工学および電気工学

フィンガープリント

「Characterization of YBCO bulk superconductors for 100 kW h flywheel」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル