Collecting Ni-Sulfate Compound from Electroless Plating Waste by Magnetic Separation Technique with Use of HTS Bulk Magnets

T. Oka, S. Sasaki, H. Sasaki, S. Fukui, J. Ogawa, T. Sato, T. Nakano, M. Ooizumi, M. Tsujimura, K. Yokoyama

研究成果: Conference article査読

抄録

The authors have developed a useful technique for extracting the Ni-sulfate compound from the "processed waste/fluid" of the electroless Ni-plating processes. After forming the fine NiHPO3 precipitate from the waste, the coarse NiSO4 crystals were synthesized through the reaction with the concentrated sulfuric acid. In the experiment, the open-gradient magnetic separation was employed to collect the NiSO4 crystals from the muddy mixture composed of these compounds. The experiments were practically conducted with use of the Gd123-based HTS bulk magnets generating up to 3.99 T, which were activated by the field cooling magnetizing method operated at 35 K. Intense magnetic field emitted from the bulk magnet attracted the paramagnetic fluid and coarse NiSO4 crystals on the bottom of the water channel, forming a giant drop of NiSO4-saturated clear fluid and the slurry of nickel sulfate hexahydrate. This preferential collection suggests a feasible recycling process of Ni resource as a raw material in the plating processes.

本文言語English
論文番号012047
ジャーナルJournal of Physics: Conference Series
1054
1
DOI
出版ステータスPublished - 2018 7 26
外部発表はい
イベント30th International Symposium on Superconductivity, ISS 2017 - Tokyo, Japan
継続期間: 2017 12 132017 12 15

ASJC Scopus subject areas

  • Physics and Astronomy(all)

フィンガープリント 「Collecting Ni-Sulfate Compound from Electroless Plating Waste by Magnetic Separation Technique with Use of HTS Bulk Magnets」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル