Continuous transition of deformation mode in Fe-30Mn-5Si-lAl alloy

Motomichi Koyama, Takahiro Sawaguchi, Kazuyuki Ogawa, Takehiko Kikuchi, Masato Murakami

研究成果: Article査読

4 被引用数 (Scopus)

抄録

Deformation modes at various stages of plastic deformation have been investigated at identical locations in an Fe-30Mn-5Si-1A1 (mass%) alloy specimen, which exhibits a good shape memory effect associated with FCC (7) →HCP (ε) martensitic transformation and relatively high ductility caused by deformation twinning. The surface relief caused by γ→ε martensitic transformation, deformation twinning and slip band formation has been analyzed by measuring surface tilt angles corresponding to each deformation mode by atomic force microscopy. Although ε-martensitic transformation is the dominant deformation mode in the early deformation stage, a part of the E-martensite plates changes to deformation twins with the increase of deformation volume. Slip deformation also occurs inside the same region under excessive strain. The continuous transition of these deformation modes also occurs in the other grains in the same order: ε martensite→deformation twins→slip bands.

本文言語English
ページ(範囲)174-179
ページ数6
ジャーナルNippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals
73
3
DOI
出版ステータスPublished - 2009 3

ASJC Scopus subject areas

  • 凝縮系物理学
  • 材料力学
  • 金属および合金
  • 材料化学

フィンガープリント

「Continuous transition of deformation mode in Fe-30Mn-5Si-lAl alloy」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル