Controlling the radiative properties of cool black-color coatings pigmented with CuO submicron particles

Hiroki Gonome, Mehdi Baneshi, Junnosuke Okajima, Atsuki Komiya, Shigenao Maruyama

研究成果: Article査読

40 被引用数 (Scopus)

抄録

The objective of this study was to design a pigmented coating with dark appearance that maintains a low temperature while exposed to sunlight. The radiative properties of a black-color coating pigmented with copper oxide (CuO) submicron particles are described. In the present work, the spectral behavior of the CuO-pigmented coating was calculated. The radiative properties of CuO particles were evaluated, and the radiative transfer in the pigmented coating was modeled using the radiation element method by ray emission model (REM2). The coating is made using optimized particles. The reflectivity is measured by spectroscopy and an integrating sphere in the visible (VIS) and near infrared (NIR) regions. By using CuO particles controlled in size, we were able to design a black-color coating with high reflectance in the NIR region. The coating substrate also plays an important role in controlling the reflectance. The NIR reflectance of the coating on a standard white substrate with appropriate coating thickness and volume fraction was much higher than that on a standard black substrate. From the comparison between the experimental and calculated results, we know that more accurate particle size control enables us to achieve better performance. The use of appropriate particles with optimum size, coating thickness and volume fraction on a suitable substrate enables cool and black-color coating against solar irradiation.

本文言語English
ページ(範囲)90-98
ページ数9
ジャーナルJournal of Quantitative Spectroscopy and Radiative Transfer
132
DOI
出版ステータスPublished - 2014 1月

ASJC Scopus subject areas

  • 放射線
  • 原子分子物理学および光学
  • 分光学

フィンガープリント

「Controlling the radiative properties of cool black-color coatings pigmented with CuO submicron particles」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル