CPS hybrid vehicle with flywheel for energy storage

S. Lee, K. Ichiryu, K. Kawamura, S. Ikeo, Kazuhisa Ito, H. Shimoyama, E. Koyabu

研究成果: Conference contribution

抄録

In the last two decades, we are facing air pollution problem and the green house effects which are successive results of increase in CO 2, Particulate Matter and so on. This leads to the development of the hybrid vehicle and the fuel saving has been realized. In this research, the hybrid vehicle using Constant Pressure System (CPS) is discussed. CPS keeps the line pressure constant by regulating the output flow rate from energy storage device according to the requirement of load. The vehicle is accelerated with energy fed from the high-pressure line to the drive pump/motor while the kinetic energy of the vehicle is stored in flywheel by working the drive pump/motor as a pump during the deceleration. In this paper, first the driving principle of the vehicle used in this study is explained, and the flywheel system is discussed. Then the vehicle speed control performance is examined on real machine and the method for improving the fuel economy is also discussed.

元の言語English
ホスト出版物のタイトルPower Transmission and Motion Control, PTMC 2005
編集者D.N. Johnston, C.R. Burrows, K.A. Edge
ページ333-347
ページ数15
出版物ステータスPublished - 2005
外部発表Yes
イベントPower Transmission and Motion Control, PTMC 2005 - Bath
継続期間: 2005 9 72005 9 9

Other

OtherPower Transmission and Motion Control, PTMC 2005
Bath
期間05/9/705/9/9

Fingerprint

Flywheels
Hybrid vehicles
Energy storage
Pumps
Greenhouse effect
Deceleration
Fuel economy
Speed control
Air pollution
Kinetic energy
Flow rate

ASJC Scopus subject areas

  • Engineering(all)

これを引用

Lee, S., Ichiryu, K., Kawamura, K., Ikeo, S., Ito, K., Shimoyama, H., & Koyabu, E. (2005). CPS hybrid vehicle with flywheel for energy storage. : D. N. Johnston, C. R. Burrows, & K. A. Edge (版), Power Transmission and Motion Control, PTMC 2005 (pp. 333-347)

CPS hybrid vehicle with flywheel for energy storage. / Lee, S.; Ichiryu, K.; Kawamura, K.; Ikeo, S.; Ito, Kazuhisa; Shimoyama, H.; Koyabu, E.

Power Transmission and Motion Control, PTMC 2005. 版 / D.N. Johnston; C.R. Burrows; K.A. Edge. 2005. p. 333-347.

研究成果: Conference contribution

Lee, S, Ichiryu, K, Kawamura, K, Ikeo, S, Ito, K, Shimoyama, H & Koyabu, E 2005, CPS hybrid vehicle with flywheel for energy storage. : DN Johnston, CR Burrows & KA Edge (版), Power Transmission and Motion Control, PTMC 2005. pp. 333-347, Power Transmission and Motion Control, PTMC 2005, Bath, 05/9/7.
Lee S, Ichiryu K, Kawamura K, Ikeo S, Ito K, Shimoyama H その他. CPS hybrid vehicle with flywheel for energy storage. : Johnston DN, Burrows CR, Edge KA, 編集者, Power Transmission and Motion Control, PTMC 2005. 2005. p. 333-347
Lee, S. ; Ichiryu, K. ; Kawamura, K. ; Ikeo, S. ; Ito, Kazuhisa ; Shimoyama, H. ; Koyabu, E. / CPS hybrid vehicle with flywheel for energy storage. Power Transmission and Motion Control, PTMC 2005. 編集者 / D.N. Johnston ; C.R. Burrows ; K.A. Edge. 2005. pp. 333-347
@inproceedings{9c17ea337684418b93ae53f16724378e,
title = "CPS hybrid vehicle with flywheel for energy storage",
abstract = "In the last two decades, we are facing air pollution problem and the green house effects which are successive results of increase in CO 2, Particulate Matter and so on. This leads to the development of the hybrid vehicle and the fuel saving has been realized. In this research, the hybrid vehicle using Constant Pressure System (CPS) is discussed. CPS keeps the line pressure constant by regulating the output flow rate from energy storage device according to the requirement of load. The vehicle is accelerated with energy fed from the high-pressure line to the drive pump/motor while the kinetic energy of the vehicle is stored in flywheel by working the drive pump/motor as a pump during the deceleration. In this paper, first the driving principle of the vehicle used in this study is explained, and the flywheel system is discussed. Then the vehicle speed control performance is examined on real machine and the method for improving the fuel economy is also discussed.",
author = "S. Lee and K. Ichiryu and K. Kawamura and S. Ikeo and Kazuhisa Ito and H. Shimoyama and E. Koyabu",
year = "2005",
language = "English",
isbn = "0470016779",
pages = "333--347",
editor = "D.N. Johnston and C.R. Burrows and K.A. Edge",
booktitle = "Power Transmission and Motion Control, PTMC 2005",

}

TY - GEN

T1 - CPS hybrid vehicle with flywheel for energy storage

AU - Lee, S.

AU - Ichiryu, K.

AU - Kawamura, K.

AU - Ikeo, S.

AU - Ito, Kazuhisa

AU - Shimoyama, H.

AU - Koyabu, E.

PY - 2005

Y1 - 2005

N2 - In the last two decades, we are facing air pollution problem and the green house effects which are successive results of increase in CO 2, Particulate Matter and so on. This leads to the development of the hybrid vehicle and the fuel saving has been realized. In this research, the hybrid vehicle using Constant Pressure System (CPS) is discussed. CPS keeps the line pressure constant by regulating the output flow rate from energy storage device according to the requirement of load. The vehicle is accelerated with energy fed from the high-pressure line to the drive pump/motor while the kinetic energy of the vehicle is stored in flywheel by working the drive pump/motor as a pump during the deceleration. In this paper, first the driving principle of the vehicle used in this study is explained, and the flywheel system is discussed. Then the vehicle speed control performance is examined on real machine and the method for improving the fuel economy is also discussed.

AB - In the last two decades, we are facing air pollution problem and the green house effects which are successive results of increase in CO 2, Particulate Matter and so on. This leads to the development of the hybrid vehicle and the fuel saving has been realized. In this research, the hybrid vehicle using Constant Pressure System (CPS) is discussed. CPS keeps the line pressure constant by regulating the output flow rate from energy storage device according to the requirement of load. The vehicle is accelerated with energy fed from the high-pressure line to the drive pump/motor while the kinetic energy of the vehicle is stored in flywheel by working the drive pump/motor as a pump during the deceleration. In this paper, first the driving principle of the vehicle used in this study is explained, and the flywheel system is discussed. Then the vehicle speed control performance is examined on real machine and the method for improving the fuel economy is also discussed.

UR - http://www.scopus.com/inward/record.url?scp=32144451346&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=32144451346&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:32144451346

SN - 0470016779

SN - 9780470016770

SP - 333

EP - 347

BT - Power Transmission and Motion Control, PTMC 2005

A2 - Johnston, D.N.

A2 - Burrows, C.R.

A2 - Edge, K.A.

ER -