Design and characterization of Cell Reference Board with multi-GHz differential channel buses

Tsuyoshi Tokiwa, Toshio Sudo, Kenji Ito, Nobuhiro Tsuruta, Yoshihiro Nishida, Yuichi Sato

研究成果

2 被引用数 (Scopus)

抄録

Higher bandwidth will be required to handle a larger volume of information for the high-definition video application in the near future. A multi-GHz differential channel bus on a board must be carefully designed to maintain good eye-diagram with high voltage opening and low timing jitter. Crosstalk noise among differential buses, reflection at the receiver noise, and via discontinuities must be taken into consideration by modeling the interconnections prior to design and fabrication. After being fabricated and assembled, the Cell Reference Board was evaluated in terms of signal integrity, power integrity and EMI.

本文言語English
ホスト出版物のタイトルProceedings - IEEE 56th Electronic Components and Technology Conference
ページ209-214
ページ数6
DOI
出版ステータスPublished - 2006
イベントIEEE 56th Electronic Components and Technology Conference - San Diego, CA, United States
継続期間: 2006 5 302006 6 2

出版物シリーズ

名前Proceedings - Electronic Components and Technology Conference
2006
ISSN(印刷版)0569-5503

Conference

ConferenceIEEE 56th Electronic Components and Technology Conference
国/地域United States
CitySan Diego, CA
Period06/5/3006/6/2

ASJC Scopus subject areas

  • 電子材料、光学材料、および磁性材料
  • 電子工学および電気工学

フィンガープリント

「Design and characterization of Cell Reference Board with multi-GHz differential channel buses」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル