Determination of elastic constants of anisotropic materials by multiple mode surface waves

Ikuo Ihara, Naoki Uchida, Hideo Koguchi, Tatsuhiko Aizawa, Junji Kihara

研究成果: Article

抄録

An efficient inversion technique to determine elstic constants of anisotropic solids from the leaky surface acoustic wave (LSAW) is presented. In the present inversion two types of LSAW velocities, the leaky Rayleigh mode and the pseudo-leaky Rayleigh mode, have been used as knewn parameters. Both the velocities in specified directions on the solid surface can be obtained from either the phase change or the amplitude change of the ultrasonic reflection coefficient of the surface. The elastic constants are determined from the directional variations of both the LSAW velocities using an optimization procedure. Based on the investigations of the stability and accuracy of the solution in inverse problems defined on a cubic crystal, it has been shown (that the use of dual mode LSAWs enables us to make better elastic constants determination with a high precision than the use of a single mode LSAW. In addition, it has been confirmed that, by performing a series of numerical simulations using a synthetic data and an experiment, all the elastic constants of the crystal can be determined accurately by the present inversion with the knowledge of the crystallographic orientation and the density.

元の言語English
ページ(範囲)457-464
ページ数8
ジャーナルNihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A
64
発行部数618
出版物ステータスPublished - 1998
外部発表Yes

Fingerprint

Elastic constants
Surface waves
Acoustic wave velocity
Ultrasonic reflection
Acoustic waves
Crystals
Inverse problems
Computer simulation
Experiments

ASJC Scopus subject areas

  • Mechanical Engineering
  • Mechanics of Materials
  • Materials Science(all)

これを引用

Determination of elastic constants of anisotropic materials by multiple mode surface waves. / Ihara, Ikuo; Uchida, Naoki; Koguchi, Hideo; Aizawa, Tatsuhiko; Kihara, Junji.

:: Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, 巻 64, 番号 618, 1998, p. 457-464.

研究成果: Article

Ihara, Ikuo ; Uchida, Naoki ; Koguchi, Hideo ; Aizawa, Tatsuhiko ; Kihara, Junji. / Determination of elastic constants of anisotropic materials by multiple mode surface waves. :: Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A. 1998 ; 巻 64, 番号 618. pp. 457-464.
@article{c1f6673aba16459cbbb33b4631df6439,
title = "Determination of elastic constants of anisotropic materials by multiple mode surface waves",
abstract = "An efficient inversion technique to determine elstic constants of anisotropic solids from the leaky surface acoustic wave (LSAW) is presented. In the present inversion two types of LSAW velocities, the leaky Rayleigh mode and the pseudo-leaky Rayleigh mode, have been used as knewn parameters. Both the velocities in specified directions on the solid surface can be obtained from either the phase change or the amplitude change of the ultrasonic reflection coefficient of the surface. The elastic constants are determined from the directional variations of both the LSAW velocities using an optimization procedure. Based on the investigations of the stability and accuracy of the solution in inverse problems defined on a cubic crystal, it has been shown (that the use of dual mode LSAWs enables us to make better elastic constants determination with a high precision than the use of a single mode LSAW. In addition, it has been confirmed that, by performing a series of numerical simulations using a synthetic data and an experiment, all the elastic constants of the crystal can be determined accurately by the present inversion with the knowledge of the crystallographic orientation and the density.",
keywords = "Anisotropy, Elastic constants, Inverse problem, Nondestructive inspection, Surface acoustic wave, Ultrasonic inspection",
author = "Ikuo Ihara and Naoki Uchida and Hideo Koguchi and Tatsuhiko Aizawa and Junji Kihara",
year = "1998",
language = "English",
volume = "64",
pages = "457--464",
journal = "Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A",
issn = "0387-5008",
publisher = "Japan Society of Mechanical Engineers",
number = "618",

}

TY - JOUR

T1 - Determination of elastic constants of anisotropic materials by multiple mode surface waves

AU - Ihara, Ikuo

AU - Uchida, Naoki

AU - Koguchi, Hideo

AU - Aizawa, Tatsuhiko

AU - Kihara, Junji

PY - 1998

Y1 - 1998

N2 - An efficient inversion technique to determine elstic constants of anisotropic solids from the leaky surface acoustic wave (LSAW) is presented. In the present inversion two types of LSAW velocities, the leaky Rayleigh mode and the pseudo-leaky Rayleigh mode, have been used as knewn parameters. Both the velocities in specified directions on the solid surface can be obtained from either the phase change or the amplitude change of the ultrasonic reflection coefficient of the surface. The elastic constants are determined from the directional variations of both the LSAW velocities using an optimization procedure. Based on the investigations of the stability and accuracy of the solution in inverse problems defined on a cubic crystal, it has been shown (that the use of dual mode LSAWs enables us to make better elastic constants determination with a high precision than the use of a single mode LSAW. In addition, it has been confirmed that, by performing a series of numerical simulations using a synthetic data and an experiment, all the elastic constants of the crystal can be determined accurately by the present inversion with the knowledge of the crystallographic orientation and the density.

AB - An efficient inversion technique to determine elstic constants of anisotropic solids from the leaky surface acoustic wave (LSAW) is presented. In the present inversion two types of LSAW velocities, the leaky Rayleigh mode and the pseudo-leaky Rayleigh mode, have been used as knewn parameters. Both the velocities in specified directions on the solid surface can be obtained from either the phase change or the amplitude change of the ultrasonic reflection coefficient of the surface. The elastic constants are determined from the directional variations of both the LSAW velocities using an optimization procedure. Based on the investigations of the stability and accuracy of the solution in inverse problems defined on a cubic crystal, it has been shown (that the use of dual mode LSAWs enables us to make better elastic constants determination with a high precision than the use of a single mode LSAW. In addition, it has been confirmed that, by performing a series of numerical simulations using a synthetic data and an experiment, all the elastic constants of the crystal can be determined accurately by the present inversion with the knowledge of the crystallographic orientation and the density.

KW - Anisotropy

KW - Elastic constants

KW - Inverse problem

KW - Nondestructive inspection

KW - Surface acoustic wave

KW - Ultrasonic inspection

UR - http://www.scopus.com/inward/record.url?scp=71449090186&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=71449090186&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:71449090186

VL - 64

SP - 457

EP - 464

JO - Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A

JF - Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A

SN - 0387-5008

IS - 618

ER -