Determination of thermal diffusivity/conductivity of oxide scale formed on steel plate by laser flash method through thermal effusivity measurement by transient hot-strip method

Rie ENDO, Hiroki HAYASHI, Mu LI, Megumi AKOSHIMA, Hikaru OKADA, Hiroshi TANEI, Miyuki HAYASHI, Masahiro SUSA

研究成果: Article査読

4 被引用数 (Scopus)

抄録

Thermal diffusivity and conductivity were determined for oxide scale formed on steel plate by the laser flash method in combination with thermal effusivity measurement by the transient hot-strip method. The thermal effusivity measurement technique was confirmed by measurement of silica glass, and the value was determined to be 2.52 kJ m-2 s-1/2 K-1 for the oxide scale formed on an ultra-low-carbon steel plate by oxidation in air at 900°C for 3 600 s. Thermal diffusivity measurements were also conducted for 1 mm-thick steel plates oxidized in air at 900°C for 770-3 600 s by the laser flash method. The apparent thermal diffusivity of samples provided the thermal diffusivity of the oxide scale based on three-layered analysis by inputting the measured value of the thermal effusivity. The measured values suggested that no significant boundary resistance exists between the oxide scale and the steel plate. The thermal conductivity and diffusivity of the oxide scale were calculated to be 1.6 W m-1 K-1 and 4.0 × 10-7 m2 s-1, respectively.

本文言語English
ページ(範囲)2773-2779
ページ数7
ジャーナルISIJ International
60
12
DOI
出版ステータスPublished - 2020 12月 15
外部発表はい

ASJC Scopus subject areas

  • 材料力学
  • 機械工学
  • 金属および合金
  • 材料化学

フィンガープリント

「Determination of thermal diffusivity/conductivity of oxide scale formed on steel plate by laser flash method through thermal effusivity measurement by transient hot-strip method」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル