Development of Control System for Keropok Keping Drying Machine

Muhammad Naim Leman, Shahrol Mohamaddan, Mohamad Syazwan Zafwan Mohamad Suffian, Abang Mohamad Aizuddin Abang Mohd Mohtar, Nur Alia Athirah Mohtadzar, Nazreen Junaidi, Satria Arjuna Julaihi

研究成果: Conference article査読

抄録

This research is focused on the development of a control system for the keropok keping drying machine by using programmable logic controller (PLC) as the controller. The control panel and human machine interface (HMI) were developed for the machine. Experimental study was conducted to validate the HMI speed data by the control panel speed display. The evaluation of the duty cycle (%) and current flow (amp) effect to the motor and fan speed were also conducted. The results showed that around 1 - 30 % and 1 - 3 % differences of the speed readings were recorded by the HMI for the motor and fan respectively. The percentage difference needs to be controlled as small as possible to ensure the HMI speed readings are more accurate. The linearity of the current flow curve to all duty cycle can be observed. The flow (amp) increases when the speed of dryer motor and fan increases. The development of the control system is expected to improve the operation of the keropok keping drying machine.

本文言語English
論文番号02016
ジャーナルMATEC Web of Conferences
87
DOI
出版ステータスPublished - 2016 12月 12
外部発表はい
イベント9th International Unimas Stem Engineering Conference, ENCON 2016 - Kuching, Sarawak, Malaysia
継続期間: 2016 10月 262016 10月 28

ASJC Scopus subject areas

  • 化学 (全般)
  • 材料科学(全般)
  • 工学(全般)

フィンガープリント

「Development of Control System for Keropok Keping Drying Machine」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル