Development of upper limb rehabilitation robot prototype for home setting

J. Annisa, S. Mohamaddan, M. S. Jamaluddin, M. Noor Aliah Abd, A. Omar, H. Helmy, A. Norafizah

研究成果: Paper査読

1 被引用数 (Scopus)

抄録

Stroke is one of the leading causes of adult disability in the world. Most of the persons affected have an important form of paralysis and they need professional help for rehabilitation. To date, there are various robotic devices designed to deliver upper limb rehabilitation for people with such disability. However, most of the robots developed are intended for use in a specialist rehabilitation centre setting. Thus, the robotic devices developed were bulky and complicated. In this research, a new design concept of upper limb rehabilitation robot for home setting was proposed. The model is expected to perform two degrees of freedom that is rotation in horizontal and vertical planes. Prior to fabrication, a kinematic analysis of robotic arm was simulated in Working Model software to recognize the important parameters. The experiment was carried out to perform the exercises and results showed a very good agreement with the analyses.

本文言語English
出版ステータスPublished - 2014
外部発表はい
イベント5th Brunei International Conference on Engineering and Technology, BICET 2014 - Bandar Seri Begawan, Brunei Darussalam
継続期間: 2014 11月 12014 11月 3

Conference

Conference5th Brunei International Conference on Engineering and Technology, BICET 2014
国/地域Brunei Darussalam
CityBandar Seri Begawan
Period14/11/114/11/3

ASJC Scopus subject areas

  • 電子工学および電気工学

フィンガープリント

「Development of upper limb rehabilitation robot prototype for home setting」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル