Dry machining tool design via chlorine ion implantation

Tatsuhiko Aizawa, Atsushi Mitsuo, Shigeo Yamamoto, Shinji Muraishi, Taro Sumitomo

研究成果: Article査読

1 被引用数 (Scopus)

抄録

Dry machining has become a key issue to significantly reduce the wastes of used lubricants and cleaning agents and to improve the environmental consciousness for medical and food applications of special tooling. Since the tools and metallic works are in direct contact in dry, severe adhesive wear and oxidation are thought to occur even at the presence of hard protective coatings. Self-lubrication mechanism with the use of lubricous oxide films is found to be effective for dry machining. Through the chlorine ion implantation to tools, titanium base oxides are in-situ formed on the tool surface. This oxide deforms elastoplastically so that both friction coefficient and wear volume are reduced even in the high-speed cutting.

本文言語English
ページ(範囲)879-882
ページ数4
ジャーナルCailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment
25
5
出版ステータスPublished - 2004 10 1

ASJC Scopus subject areas

  • Materials Science(all)
  • Physics and Astronomy(all)

フィンガープリント 「Dry machining tool design via chlorine ion implantation」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル