抜粋
An eccentric spiral antenna printed on a dielectric substrate has been analyzed. A main beam is formed in a direction of 27° off-normal to the antenna plane with an axial ratio of 0.8 dB. The bandwidth where the gain reduction remains within 3 dB is found to be 29%, over which the axial ratio is less than 3 dB. The radiation efficiency is evaluated to be about 70% in the vicinity of the design center frequency.
| 元の言語 | English |
|---|---|
| ページ（範囲） | 190-193 |
| ページ数 | 4 |
| ジャーナル | IEEE Antennas and Propagation Society, AP-S International Symposium (Digest) |
| 巻 | 1 |
| 出版物ステータス | Published - 1995 1 1 |
| 外部発表 | Yes |
| イベント | Proceedings of the 1995 IEEE Antennas and Propagation Society International Symposium. Part 4 (of 4) - Newport Beach, CA, USA 継続期間: 1995 6 18 → 1995 6 23 |
ASJC Scopus subject areas
- Electrical and Electronic Engineering
フィンガープリント Eccentric spiral antenna printed on a dielectric substrate' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。
これを引用
Hirose, K., & Nakano, H. (1995). Eccentric spiral antenna printed on a dielectric substrate. IEEE Antennas and Propagation Society, AP-S International Symposium (Digest), 1, 190-193.