Effect of hold time on low cycle fatigue life of micro solder joint

Yoshihiko Kanda, Yoshiharu Kariya, Yusuke Mochizuki

研究成果: Article査読

16 被引用数 (Scopus)

抄録

Effect of holding time and temperature on the fatigue life of micro Sn-Ag-Cu solder joint has been studied with waveform of triangle and trapezoid wave at 298 K and 398 K. Both the microstructural coarsening and the crack propagation occurred simultaneously and therefore the cyclic load decreased rapidly in the trapezoidal wave at 398 K compared with the other conditions. Therefore, under the condition of waveform that includes holding time at high temperature, it is necessary to define fatigue life by considering crack length, although the load drop life definition is typically employed for the low cycle fatigue evaluation. The fatigue life of Sn-Ag-Cu micro solder joints is not strongly affected by temperature and holding time when the crack length is considered to define fatigue life. This is different form the trends in large scale bulk specimen and is attributed to the peculiar microstructure of the Sn-Ag-Cu.

本文言語English
ページ(範囲)1524-1530
ページ数7
ジャーナルMaterials Transactions
49
7
DOI
出版ステータスPublished - 2008 7

ASJC Scopus subject areas

  • 材料科学(全般)
  • 凝縮系物理学
  • 材料力学
  • 機械工学

フィンガープリント

「Effect of hold time on low cycle fatigue life of micro solder joint」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル