Effect of Reinforcing Fillers and Fibres Treatment on Morphological and Mechanical Properties of Typha-Phenolic Resin Composites

Elhadji Babacar Ly, Marieme Josephine Lette, Abdou Karim Diallo, Adama Gassama, Akito Takasaki, Diene Ndiaye

研究成果: Article

抄録

This study estimates the potential using of typha australis (t. australis) as reinforcing element in composite materials based on plant fibres as way of enhanced for this invasive plant. Composite materials based on t. australis, bamboo and rice husk fibres were prepared with phenolic resin and their properties compared in order to evaluate this invasive plant in relation to the commonly used fibres in composite materials. Scanning Electronic Microscopy shows similarity in the morphologic structure of t. australis and bamboo fibres. The failure mode is typically the same for all composite materials when fibres or system undergo the same treatment. The 3-point bending tests exhibit mechanical characteristics in the same range for different composites materials, for example the Young modulus for t. australis, bamboo and rice husk composites without any modification are estimated at 1.92, 2.04 and 2.00 GPa respectively.

元の言語English
ページ(範囲)1046-1053
ページ数8
ジャーナルFibers and Polymers
20
発行部数5
DOI
出版物ステータスPublished - 2019 5 1

Fingerprint

Phenolic resins
Fillers
Mechanical properties
Bamboo
Fibers
Composite materials
Bending tests
Failure modes
phenol-formaldehyde resin
Microscopic examination
Elastic moduli
Scanning

ASJC Scopus subject areas

  • Chemistry(all)
  • Chemical Engineering(all)
  • Polymers and Plastics

これを引用

Effect of Reinforcing Fillers and Fibres Treatment on Morphological and Mechanical Properties of Typha-Phenolic Resin Composites. / Ly, Elhadji Babacar; Lette, Marieme Josephine; Diallo, Abdou Karim; Gassama, Adama; Takasaki, Akito; Ndiaye, Diene.

:: Fibers and Polymers, 巻 20, 番号 5, 01.05.2019, p. 1046-1053.

研究成果: Article

Ly, Elhadji Babacar ; Lette, Marieme Josephine ; Diallo, Abdou Karim ; Gassama, Adama ; Takasaki, Akito ; Ndiaye, Diene. / Effect of Reinforcing Fillers and Fibres Treatment on Morphological and Mechanical Properties of Typha-Phenolic Resin Composites. :: Fibers and Polymers. 2019 ; 巻 20, 番号 5. pp. 1046-1053.
@article{45ba3cee4e714f1f91cdaa2d88d407ce,
title = "Effect of Reinforcing Fillers and Fibres Treatment on Morphological and Mechanical Properties of Typha-Phenolic Resin Composites",
abstract = "This study estimates the potential using of typha australis (t. australis) as reinforcing element in composite materials based on plant fibres as way of enhanced for this invasive plant. Composite materials based on t. australis, bamboo and rice husk fibres were prepared with phenolic resin and their properties compared in order to evaluate this invasive plant in relation to the commonly used fibres in composite materials. Scanning Electronic Microscopy shows similarity in the morphologic structure of t. australis and bamboo fibres. The failure mode is typically the same for all composite materials when fibres or system undergo the same treatment. The 3-point bending tests exhibit mechanical characteristics in the same range for different composites materials, for example the Young modulus for t. australis, bamboo and rice husk composites without any modification are estimated at 1.92, 2.04 and 2.00 GPa respectively.",
keywords = "Composites, Mechanical properties, Morphology, Typha australis, Water uptake",
author = "Ly, {Elhadji Babacar} and Lette, {Marieme Josephine} and Diallo, {Abdou Karim} and Adama Gassama and Akito Takasaki and Diene Ndiaye",
year = "2019",
month = "5",
day = "1",
doi = "10.1007/s12221-019-1087-y",
language = "English",
volume = "20",
pages = "1046--1053",
journal = "Fibers and Polymers",
issn = "1229-9197",
publisher = "KOREAN FIBER SOCIETY",
number = "5",

}

TY - JOUR

T1 - Effect of Reinforcing Fillers and Fibres Treatment on Morphological and Mechanical Properties of Typha-Phenolic Resin Composites

AU - Ly, Elhadji Babacar

AU - Lette, Marieme Josephine

AU - Diallo, Abdou Karim

AU - Gassama, Adama

AU - Takasaki, Akito

AU - Ndiaye, Diene

PY - 2019/5/1

Y1 - 2019/5/1

N2 - This study estimates the potential using of typha australis (t. australis) as reinforcing element in composite materials based on plant fibres as way of enhanced for this invasive plant. Composite materials based on t. australis, bamboo and rice husk fibres were prepared with phenolic resin and their properties compared in order to evaluate this invasive plant in relation to the commonly used fibres in composite materials. Scanning Electronic Microscopy shows similarity in the morphologic structure of t. australis and bamboo fibres. The failure mode is typically the same for all composite materials when fibres or system undergo the same treatment. The 3-point bending tests exhibit mechanical characteristics in the same range for different composites materials, for example the Young modulus for t. australis, bamboo and rice husk composites without any modification are estimated at 1.92, 2.04 and 2.00 GPa respectively.

AB - This study estimates the potential using of typha australis (t. australis) as reinforcing element in composite materials based on plant fibres as way of enhanced for this invasive plant. Composite materials based on t. australis, bamboo and rice husk fibres were prepared with phenolic resin and their properties compared in order to evaluate this invasive plant in relation to the commonly used fibres in composite materials. Scanning Electronic Microscopy shows similarity in the morphologic structure of t. australis and bamboo fibres. The failure mode is typically the same for all composite materials when fibres or system undergo the same treatment. The 3-point bending tests exhibit mechanical characteristics in the same range for different composites materials, for example the Young modulus for t. australis, bamboo and rice husk composites without any modification are estimated at 1.92, 2.04 and 2.00 GPa respectively.

KW - Composites

KW - Mechanical properties

KW - Morphology

KW - Typha australis

KW - Water uptake

UR - http://www.scopus.com/inward/record.url?scp=85067641565&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85067641565&partnerID=8YFLogxK

U2 - 10.1007/s12221-019-1087-y

DO - 10.1007/s12221-019-1087-y

M3 - Article

AN - SCOPUS:85067641565

VL - 20

SP - 1046

EP - 1053

JO - Fibers and Polymers

JF - Fibers and Polymers

SN - 1229-9197

IS - 5

ER -