Efficiency comparison between brushless DC motor and brushless AC motor considering driving method and mAChine design

Masataka Miyamasu, Kan Akatsu

研究成果: Article

7 引用 (Scopus)

抄録

This paper describes an approach to achieve a high efficiency drive such a brushless AC (BLAC) drive by a Brushless DC (BLDC) drive. BLDC motors with an excited rectangular voltage for 120 electrical degrees per cycle are commonly used for low-cost applications of permanent magnet synchronous motors (PMSMs). This drive method yields low-order harmonic components in the current waveform. These harmonic components cause mechanical vibration and electrical losses. Therefore, a BLDC drive is not applicable to a sinusoidal back-EMF machine. However, with regard to the high-frequency loss caused by a pulse width modulation (PWM) carrier and a switching loss, the BLDC drive has the potential to achieve higher efficiency than the BLAC drive. This paper compares the overall efficiency, which includes the PWM carrier frequency loss, by using a coupling analysis between a finite element analysis (FEA) and a circuit simulator. Two surface-mounted PMSMs (SPMSMs) are tested. One has a sinusoidal back-EMF waveform (BLAC machine), and the other has a trapezoidal back-EMF waveform (BLDC machine). Both the driving methods of the BLDC drive and the BLAC drive are adapted to each machine and their efficiencies are compared by both simulations and experiments. The results show that the BLDC machine with a BLDC drive has higher efficiency than the BLAC machine with a BLAC drive.

元の言語English
ページ(範囲)79-86
ページ数8
ジャーナルIEEJ Journal of Industry Applications
2
発行部数1
DOI
出版物ステータスPublished - 2013

Fingerprint

AC motors
Brushless DC motors
Machine design
Electric potential
Synchronous motors
Pulse width modulation
Permanent magnets
Simulators
Finite element method

ASJC Scopus subject areas

  • Energy Engineering and Power Technology
  • Automotive Engineering
  • Electrical and Electronic Engineering
  • Industrial and Manufacturing Engineering
  • Mechanical Engineering

これを引用

@article{54416390fd4e4a959bb8f39843f30058,
title = "Efficiency comparison between brushless DC motor and brushless AC motor considering driving method and mAChine design",
abstract = "This paper describes an approach to achieve a high efficiency drive such a brushless AC (BLAC) drive by a Brushless DC (BLDC) drive. BLDC motors with an excited rectangular voltage for 120 electrical degrees per cycle are commonly used for low-cost applications of permanent magnet synchronous motors (PMSMs). This drive method yields low-order harmonic components in the current waveform. These harmonic components cause mechanical vibration and electrical losses. Therefore, a BLDC drive is not applicable to a sinusoidal back-EMF machine. However, with regard to the high-frequency loss caused by a pulse width modulation (PWM) carrier and a switching loss, the BLDC drive has the potential to achieve higher efficiency than the BLAC drive. This paper compares the overall efficiency, which includes the PWM carrier frequency loss, by using a coupling analysis between a finite element analysis (FEA) and a circuit simulator. Two surface-mounted PMSMs (SPMSMs) are tested. One has a sinusoidal back-EMF waveform (BLAC machine), and the other has a trapezoidal back-EMF waveform (BLDC machine). Both the driving methods of the BLDC drive and the BLAC drive are adapted to each machine and their efficiencies are compared by both simulations and experiments. The results show that the BLDC machine with a BLDC drive has higher efficiency than the BLAC machine with a BLAC drive.",
keywords = "Blushless AC (BLAC), Blushless DC (BLDC), Coupling analysis, Efficiency, Pulse width modulation (PWM), Sinusoidal back-EMF, Surface-mounted permanent magnet synchronous machine (SPMSM), Trapezoidal back-EMF",
author = "Masataka Miyamasu and Kan Akatsu",
year = "2013",
doi = "10.1541/ieejjia.2.79",
language = "English",
volume = "2",
pages = "79--86",
journal = "IEEJ Journal of Industry Applications",
issn = "2187-1094",
publisher = "The Institute of Electrical Engineers of Japan",
number = "1",

}

TY - JOUR

T1 - Efficiency comparison between brushless DC motor and brushless AC motor considering driving method and mAChine design

AU - Miyamasu, Masataka

AU - Akatsu, Kan

PY - 2013

Y1 - 2013

N2 - This paper describes an approach to achieve a high efficiency drive such a brushless AC (BLAC) drive by a Brushless DC (BLDC) drive. BLDC motors with an excited rectangular voltage for 120 electrical degrees per cycle are commonly used for low-cost applications of permanent magnet synchronous motors (PMSMs). This drive method yields low-order harmonic components in the current waveform. These harmonic components cause mechanical vibration and electrical losses. Therefore, a BLDC drive is not applicable to a sinusoidal back-EMF machine. However, with regard to the high-frequency loss caused by a pulse width modulation (PWM) carrier and a switching loss, the BLDC drive has the potential to achieve higher efficiency than the BLAC drive. This paper compares the overall efficiency, which includes the PWM carrier frequency loss, by using a coupling analysis between a finite element analysis (FEA) and a circuit simulator. Two surface-mounted PMSMs (SPMSMs) are tested. One has a sinusoidal back-EMF waveform (BLAC machine), and the other has a trapezoidal back-EMF waveform (BLDC machine). Both the driving methods of the BLDC drive and the BLAC drive are adapted to each machine and their efficiencies are compared by both simulations and experiments. The results show that the BLDC machine with a BLDC drive has higher efficiency than the BLAC machine with a BLAC drive.

AB - This paper describes an approach to achieve a high efficiency drive such a brushless AC (BLAC) drive by a Brushless DC (BLDC) drive. BLDC motors with an excited rectangular voltage for 120 electrical degrees per cycle are commonly used for low-cost applications of permanent magnet synchronous motors (PMSMs). This drive method yields low-order harmonic components in the current waveform. These harmonic components cause mechanical vibration and electrical losses. Therefore, a BLDC drive is not applicable to a sinusoidal back-EMF machine. However, with regard to the high-frequency loss caused by a pulse width modulation (PWM) carrier and a switching loss, the BLDC drive has the potential to achieve higher efficiency than the BLAC drive. This paper compares the overall efficiency, which includes the PWM carrier frequency loss, by using a coupling analysis between a finite element analysis (FEA) and a circuit simulator. Two surface-mounted PMSMs (SPMSMs) are tested. One has a sinusoidal back-EMF waveform (BLAC machine), and the other has a trapezoidal back-EMF waveform (BLDC machine). Both the driving methods of the BLDC drive and the BLAC drive are adapted to each machine and their efficiencies are compared by both simulations and experiments. The results show that the BLDC machine with a BLDC drive has higher efficiency than the BLAC machine with a BLAC drive.

KW - Blushless AC (BLAC)

KW - Blushless DC (BLDC)

KW - Coupling analysis

KW - Efficiency

KW - Pulse width modulation (PWM)

KW - Sinusoidal back-EMF

KW - Surface-mounted permanent magnet synchronous machine (SPMSM)

KW - Trapezoidal back-EMF

UR - http://www.scopus.com/inward/record.url?scp=84964684640&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84964684640&partnerID=8YFLogxK

U2 - 10.1541/ieejjia.2.79

DO - 10.1541/ieejjia.2.79

M3 - Article

AN - SCOPUS:84964684640

VL - 2

SP - 79

EP - 86

JO - IEEJ Journal of Industry Applications

JF - IEEJ Journal of Industry Applications

SN - 2187-1094

IS - 1

ER -