The present investigation focuses on the incorporation of synthetic motor oil as an inexpensive, rich carbon source in bulk MgB2 superconductor and its effect on superconducting and flux pinning properties. A set of three MgB2 bulk samples were prepared from commercial high-purity powders of Mg metal and amorphous B powder utilizing a conventional in situ solid-state reaction process. Before sintering, the MgB2 samples were immersed in used and new synthetic motor oil for a standby time of 30 min and sintered in pure Ar atmosphere at 775 °C for 3 h. X-ray powder diffractometer (XRD) analysis confirmed that single-phase formation of MgB2 with a small shift in X-ray diffraction peaks especially at (110) towards the peak position due to the effect of carbon substitution into the boron sites in lattice for samples immersed in new and used synthetic oil. The magnetization measurements indicated the Tc (onset) value to somewhat decrease to 37.5 K as a result of carbon doping. Microstructural observations with scanning electron microscopy (SEM) suggested that fine nano-sized MgB2 grains improved self-field critical current density around 3.8 × 105 A/cm2 at 20 K for all samples studied. Further, the high-field critical current density (Jc) was improved especially for the sample immersed in used synthetic motor oil with the value of 2.7 × 104 A/cm2, 6 × 103 A/cm2 at 20 K, and at 3 T and 4 T, which is higher as compared to pure-MgB2 sample. In essence, the results signify that the bulk MgB2 samples immersed with used synthetic motor oil would improve the bulk performance at high magnetic fields indicating to be a viable option for industrial applications.
|ジャーナル||Journal of Superconductivity and Novel Magnetism|
|出版ステータス||Published - 2022 10月|
ASJC Scopus subject areas