Evaluation of grinding performance by mechanical properties of super abrasive wheel -evaluation of grade by grinding force

Sawa Takekazu, Nishikawa Naohiro, Ikuse Yasushi

研究成果: Conference contribution

1 引用 (Scopus)

抜粋

There is the grade as one of the selection criteria of a grinding wheel like WA whetstone or GC whetstone. The grade of grinding wheel is defined as an index which shows the strength of connection of a grain and a grain, and is usually estimated by bending strength. There are many papers about the relationship between the grade of a grinding wheel and the grinding performance. Relationship between the grade of a grinding wheel and the grinding performance is almost clear. Also, the relationship between mechanical properties of a grinding wheel and the grade is also clear. On the other hand, since the grain layer of a super abrasive grinding wheel is thin, it is difficult to apply the conventional evaluation test of the grade. The evaluation method of the grade which can be adapted the super abrasive grinding wheel is not established. In addition, since the grade of a super abrasive grinding wheel is a manufacture manufacturer's original standard, there is a minute difference by manufacturer. The super abrasive grinding wheel as well as the grinding wheel is conjectured that the grade influences the grinding performance. Namely, it is important to relate the grade and the mechanical properties of a grain layer. However, researches which relate the grade, the grinding performance and the mechanical properties of a super abrasive grinding wheel are not done so far. Therefore, this study examined the relationship between the mechanical properties of a grain layer of a super abrasive grinding wheel and the grade, the grinding performance. The final objective of this study is to evaluate the grinding performance from mechanical properties of a grain layer of a super abrasive grinding wheel. The purpose of this report is to clarify relationship between the grade and the grinding force in a resinoid bond diamond wheel. The specific experiment procedure is as follows. When carrying out surface grinding of the diamond sticks using a grinding wheel, the relationship of the grade and the grinding force was clarified. Based on the knowledge acquired in this experiment, relationship between the grade of a super abrasive grinding wheel and the grinding force was considered. As the results, it confirmed that the grade of a resinoid bond diamond wheel could be evaluated by the grinding force.

元の言語English
ホスト出版物のタイトルRecent Development in Machining, Materials and Mechanical Technologies
編集者Jyh-Chen Chen, Usuki Hiroshi, Sheng-Wei Lee, Yiin-Kuen Fuh
出版者Trans Tech Publications Ltd
ページ266-270
ページ数5
ISBN(印刷物)9783038354956
DOI
出版物ステータスPublished - 2015 1 1
イベントInternational Conference on Machining, Materials and Mechanical Technologies, IC3MT 2014 - Taipei City, Taiwan, Province of China
継続期間: 2014 8 312014 9 5

出版物シリーズ

名前Key Engineering Materials
656-657
ISSN(印刷物)1013-9826
ISSN(電子版)1662-9795

Other

OtherInternational Conference on Machining, Materials and Mechanical Technologies, IC3MT 2014
Taiwan, Province of China
Taipei City
期間14/8/3114/9/5

ASJC Scopus subject areas

  • Materials Science(all)
  • Mechanics of Materials
  • Mechanical Engineering

フィンガープリント Evaluation of grinding performance by mechanical properties of super abrasive wheel -evaluation of grade by grinding force' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用

    Takekazu, S., Naohiro, N., & Yasushi, I. (2015). Evaluation of grinding performance by mechanical properties of super abrasive wheel -evaluation of grade by grinding force. : J-C. Chen, U. Hiroshi, S-W. Lee, & Y-K. Fuh (版), Recent Development in Machining, Materials and Mechanical Technologies (pp. 266-270). (Key Engineering Materials; 巻数 656-657). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/KEM.656-657.266