Evaluation of the grinding performance by mechanical properties of super abrasive wheel - Relationship between modulus of rupture and the critical grain holding power

Takekazu Sawa, Yasushi Ikuse, Naohiro Nishikawa, Tosimi Odaki, Susumu Tomita, Tomohiro Yokota, Masahiro Yokouchi

研究成果: Conference contribution

1 引用 (Scopus)

抜粋

This paper describes relationship between the grade and mechanical properties of a diamond wheel. The grade of a diamond wheel was investigated by abrasion test using diamond sticks of the same composition as a grain layer. The critical pressure and abrasion rate of diamond sticks were measured from abrasion test. Further, the number of grains on a unit area was calculated by approximating an abrasive grain to a sphere and a cube, and critical grain holding power was calculated by dividing the critical pressure by the number of grains on a unit area. The mechanical properties of a diamond stick measured bending strength and elastic modulus. Bending strength was measured by a three point bending test, and the elastic modulus was measured by an ultrasonic pulse method. In addition, Modulus of rupture was calculated from bending strength and elastic modulus. The relationship between the grade and mechanical properties of a diamond stick was considered by comparing the critical grain holding power with modulus of rupture. As the results, it found that the critical grain holding power and modulus of rupture of a diamond stick showed good correlation.

元の言語English
ホスト出版物のタイトル10th International Conference on Progress of Machining Technology, ICPMT 2012
ページ27-30
ページ数4
出版物ステータスPublished - 2012 12 1
外部発表Yes
イベント10th International Conference on Progress of Machining Technology, ICPMT 2012 - Tsubame, Niigata, Japan
継続期間: 2012 9 252012 9 27

出版物シリーズ

名前10th International Conference on Progress of Machining Technology, ICPMT 2012

Conference

Conference10th International Conference on Progress of Machining Technology, ICPMT 2012
Japan
Tsubame, Niigata
期間12/9/2512/9/27

ASJC Scopus subject areas

  • Industrial and Manufacturing Engineering

フィンガープリント Evaluation of the grinding performance by mechanical properties of super abrasive wheel - Relationship between modulus of rupture and the critical grain holding power' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用

    Sawa, T., Ikuse, Y., Nishikawa, N., Odaki, T., Tomita, S., Yokota, T., & Yokouchi, M. (2012). Evaluation of the grinding performance by mechanical properties of super abrasive wheel - Relationship between modulus of rupture and the critical grain holding power. : 10th International Conference on Progress of Machining Technology, ICPMT 2012 (pp. 27-30). (10th International Conference on Progress of Machining Technology, ICPMT 2012).