Experimental study for swelling ratio and pressure of water swelling material as an impermeable material

Shinya Inazumi, Makoto Kimura, Tadashi Wakatsuki, Masakatsu Kobayashi

研究成果: Article査読

2 被引用数 (Scopus)

抄録

A water swelling material is one of the rubbery impermeable materials which mixed synthetic resin elastomers as a base material, high absorbency polymers, filler and solvents. In this study, swelling characteristics of the water swelling material on the water polluted with COD and BOD, as an impermeable material at coastal waste landfill site, are examined by laboratory swelling ratio test. Furthermore, the factor in which it influences the swelling pressure of water swelling material is clarified by measuring the swelling pressure. As the results, the COD nor the BOD concentrations in the soaked water influence the swelling ratio of the water swelling material. When the thicknesses of water swelling material are 2 and 3mm, the maximum swelling pressure of 0.5 and 0.7MPa that correspond to hydraulic pressure by depth of 50 and 70 m is possessed, respectively.

本文言語English
ページ(範囲)240-244
ページ数5
ジャーナルZairyo/Journal of the Society of Materials Science, Japan
60
3
DOI
出版ステータスPublished - 2011 3月
外部発表はい

ASJC Scopus subject areas

  • 材料科学(全般)
  • 凝縮系物理学
  • 材料力学
  • 機械工学

フィンガープリント

「Experimental study for swelling ratio and pressure of water swelling material as an impermeable material」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル