Fabrication and tensile tests of aluminum foam sandwich with dense steel face sheets by friction stir processing route

Yoshihiko Hangai, Nobuyuki Ishii, Shinji Koyama, Takao Utsunomiya, Osamu Kuwazuru, Nobuhiro Yoshikawa

研究成果: Article

19 引用 (Scopus)

抜粋

An aluminum foam sandwich was fabricated by FSP route. In this process, both the fabrication of a foamable precursor and the metallurgical bonding between the precursor and a dense steel sheet can be simultaneously conducted. Although intermetallic compounds consisting of Fe 2Al 5 and FeAl 3 were generated, tensile tests revealed that the bonding strength of the interface was relatively high compared with the tensile strength of the aluminum foam with a porosity of approximately 80%.

元の言語English
ページ(範囲)584-587
ページ数4
ジャーナルMaterials Transactions
53
発行部数4
DOI
出版物ステータスPublished - 2012 4 5

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

フィンガープリント Fabrication and tensile tests of aluminum foam sandwich with dense steel face sheets by friction stir processing route' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用