Fabrication of aluminum foam/dense steel composite by friction stir welding

Yoshihiko Hangai, Shinji Koyama, Makoto Hasegawa, Takao Utsunomiya

研究成果: Article査読

24 被引用数 (Scopus)

抄録

Aluminum foam/dense steel composites were fabricated by friction stir welding (FSW). It is expected that both mixing a blowing agent into aluminum and bonding the aluminum precursor to steel can be conducted simultaneously by FSW. It was shown that although heat treatment of the precursor evolved a brittle intermetallic compound layer, the bonding strength of the interface consisting of the intermetallic compound layer was relatively high compared with the fracture strength of the aluminum foam itself.

本文言語English
ページ(範囲)2184-2186
ページ数3
ジャーナルMetallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
41
9
DOI
出版ステータスPublished - 2010 9

ASJC Scopus subject areas

  • 凝縮系物理学
  • 材料力学
  • 金属および合金

フィンガープリント

「Fabrication of aluminum foam/dense steel composite by friction stir welding」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル