Fabrication of porous aluminum by friction stir processing

Yoshihiko Hangai, Takao Utsunomiya

研究成果: Article

52 引用 (Scopus)

抄録

Closed-cell porous aluminum was fabricated by friction stir processing (FSP). Porous aluminum with a porosity of about 50 pct was successfully fabricated in a short time with low energy consumption and using inexpensive aluminum plates. Multipass FSP was efficient for fabricating high-porosity and high-quality porous aluminum. The results of the present study show that the FSP technique has high potential for fabricating porous aluminum at a low cost by a more environmentally friendly process.

元の言語English
ページ(範囲)275-277
ページ数3
ジャーナルMetallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
40
発行部数2
DOI
出版物ステータスPublished - 2009

Fingerprint

Aluminum
friction
Friction
aluminum
Fabrication
fabrication
Processing
Porosity
porosity
energy consumption
Energy utilization
cells
Costs

ASJC Scopus subject areas

  • Condensed Matter Physics
  • Metals and Alloys
  • Mechanics of Materials

これを引用

@article{c591b85061a143358bdc0ddedc537d08,
title = "Fabrication of porous aluminum by friction stir processing",
abstract = "Closed-cell porous aluminum was fabricated by friction stir processing (FSP). Porous aluminum with a porosity of about 50 pct was successfully fabricated in a short time with low energy consumption and using inexpensive aluminum plates. Multipass FSP was efficient for fabricating high-porosity and high-quality porous aluminum. The results of the present study show that the FSP technique has high potential for fabricating porous aluminum at a low cost by a more environmentally friendly process.",
author = "Yoshihiko Hangai and Takao Utsunomiya",
year = "2009",
doi = "10.1007/s11661-008-9733-9",
language = "English",
volume = "40",
pages = "275--277",
journal = "Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science",
issn = "1073-5623",
publisher = "Springer Boston",
number = "2",

}

TY - JOUR

T1 - Fabrication of porous aluminum by friction stir processing

AU - Hangai, Yoshihiko

AU - Utsunomiya, Takao

PY - 2009

Y1 - 2009

N2 - Closed-cell porous aluminum was fabricated by friction stir processing (FSP). Porous aluminum with a porosity of about 50 pct was successfully fabricated in a short time with low energy consumption and using inexpensive aluminum plates. Multipass FSP was efficient for fabricating high-porosity and high-quality porous aluminum. The results of the present study show that the FSP technique has high potential for fabricating porous aluminum at a low cost by a more environmentally friendly process.

AB - Closed-cell porous aluminum was fabricated by friction stir processing (FSP). Porous aluminum with a porosity of about 50 pct was successfully fabricated in a short time with low energy consumption and using inexpensive aluminum plates. Multipass FSP was efficient for fabricating high-porosity and high-quality porous aluminum. The results of the present study show that the FSP technique has high potential for fabricating porous aluminum at a low cost by a more environmentally friendly process.

UR - http://www.scopus.com/inward/record.url?scp=59149101223&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=59149101223&partnerID=8YFLogxK

U2 - 10.1007/s11661-008-9733-9

DO - 10.1007/s11661-008-9733-9

M3 - Article

AN - SCOPUS:59149101223

VL - 40

SP - 275

EP - 277

JO - Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

JF - Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

SN - 1073-5623

IS - 2

ER -