Finite element assisted prediction of ductile fracture in sheet bulging

Bryan J.Mac Donald, Ruben Lostado Lorza, Shouichirou Yoshihara

研究成果: Conference contribution

抜粋

With growing demand for energy efficiency, there is much focus on reducing oil consumption rates and utilising alternative fuels. A contributor to the solution in this area is to produce lighter vehicles that are more fuel efficient and/or allow for the use of alternative fuel sources (e.g. electric powered automobiles). Near-net-shape manufacturing processes such as hydroforming have great potential to reduce structural weight while still maintaining structural strength and performance. Finite element analysis techniques have proved invaluable in optimizing such hydroforming processes, however, the majority of such studies have used simple predictors of failure which are usually yield criteria such as von Mises stress. There is clearly potential to obtain more optimal solutions using more advanced predictors of failure. This paper compared the Von Mises stress failure criteria and the Oyane's ductile fracture criteria in the sheet hydroforming of magnesium alloys. It was found that the results obtained from the models which used Oyane's ductile fracture criteria were more realistic than those obtained from those that used Von Mises stress as a failure criteria.

元の言語English
ホスト出版物のタイトルProceedings of the 20th International ESAFORM Conference on Material Forming, ESAFORM 2017
編集者Dermot Brabazon, Inam Ul Ahad, Sumsun Naher
出版者American Institute of Physics Inc.
1896
ISBN(電子版)9780735415805
DOI
出版物ステータスPublished - 2017 10 16
外部発表Yes
イベント20th International ESAFORM Conference on Material Forming, ESAFORM 2017 - Dublin, Ireland
継続期間: 2017 4 262017 4 28

Other

Other20th International ESAFORM Conference on Material Forming, ESAFORM 2017
Ireland
Dublin
期間17/4/2617/4/28

ASJC Scopus subject areas

  • Physics and Astronomy(all)

フィンガープリント Finite element assisted prediction of ductile fracture in sheet bulging' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用

    Donald, B. J. M., Lorza, R. L., & Yoshihara, S. (2017). Finite element assisted prediction of ductile fracture in sheet bulging. : D. Brabazon, I. Ul Ahad, & S. Naher (版), Proceedings of the 20th International ESAFORM Conference on Material Forming, ESAFORM 2017 (巻 1896). [080012] American Institute of Physics Inc.. https://doi.org/10.1063/1.5008092