Fluid force acting on circular cylinder of finite length in lock-in condition

Shiki Okamoto, Suguru Jimbo, Taketo Hirose, Kousuke Ootsuka

研究成果: Article

2 引用 (Scopus)

抜粋

This paper describes the fluid force acting on circular cylinder of finite length in the locking-in region. The experiment was carried out in an N. P. L. blow-down type wind-tunnel with a working section of 500 mm × 500 mm × 2 000 mm at Reynolds number of 1.32 × 104. The cylinder was forced to oscillate sinusoidally in the lift direction. The power spectrum of the fluctuating velocity in the wake behind a circular cylinder was measured to show the locking-in region in the present experiment. The time-mean pressure distribution and fluctuation pressure distribution on the circular cylinder were measured for the displacement in the vibration. Consequently it was found that the mean drag and fluctuating lift increase and become maximum in the locking-in region, while the base pressure in the rear surface (θ = 180°) of the cylinder becomes low and attains minimum.

元の言語English
ページ(範囲)1718-1726
ページ数9
ジャーナルNihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B
72
発行部数7
DOI
出版物ステータスPublished - 2006 7

ASJC Scopus subject areas

  • Condensed Matter Physics
  • Mechanical Engineering

フィンガープリント Fluid force acting on circular cylinder of finite length in lock-in condition' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用