Focusing type high power transducer using burst drive for ultrasonic welding

Minoru Kurosawa, Katsuya Nakazawa, Yoshikazu Koike, Sadayuki Ueha

研究成果: Conference contribution

抄録

In order to operate ultrasonic welding tools more efficiently at high frequency over 100 kHz to MHz order, a focusing type transducer is proposed. The transducer is constructed with metal bodies. A disk PZT element is glued on the back surface of one metal. The PZT is driven by burst waves with an electric source. The metal bodies consist two kinds of materials for transmission medium. The intermediate boundary of the two metals is formed spherical so that the plain wave from the PZT element concentrates with refraction due to the difference of the propagation velocity of the dilatational wave. At this concentrated region, the transducer has the output mechanical port so that a work is placed here. A driving frequency of the PZT is a resonance frequency of the thickness mode of the element. A transduce efficiency from electricity to acoustic power is about 90% calculated from a simple model. For designing this transducer, numerical simulation using FEM and Newmark-β method is carried out. This simulation shows that the transform gain of the vibration velocity is about four times and amplitude distribution at the output surface is almost uniform at 570 kHz. The experiment has supported this result. It is available to obtain 1.2 m/s vibration velocity at the output.

本文言語English
ホスト出版物のタイトルProceedings of the IEEE Ultrasonics Symposium
出版社Publ by IEEE
ページ401-404
ページ数4
ISBN(印刷版)0780312783, 9780780312784
DOI
出版ステータスPublished - 1993
外部発表はい
イベントProceedings of the IEEE 1993 Ultrasonics Symposium. Part 1 (of 2) - Baltimore, MD, USA
継続期間: 1993 10 311993 11 3

出版物シリーズ

名前Proceedings of the IEEE Ultrasonics Symposium
1
ISSN(印刷版)1051-0117

Other

OtherProceedings of the IEEE 1993 Ultrasonics Symposium. Part 1 (of 2)
CityBaltimore, MD, USA
Period93/10/3193/11/3

ASJC Scopus subject areas

  • Acoustics and Ultrasonics

フィンガープリント 「Focusing type high power transducer using burst drive for ultrasonic welding」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル