FRF measurement of rotational DOFs by T-block approach (improvement of accuracy for random noise and application to a car body)

N. Hosoya, T. Yoshimura

研究成果: Conference contribution

2 引用 (Scopus)

抜粋

The importance of rotational FRF was recognized widely, and many attempts have been made to measure those FRFs experimentally, but the satisfactory results can hardly be seen. The authors have proposed an estimation method of FRF on rotational degrees of freedom (DOFs) by adding a T-block to the structure's measurement point. In this paper the measurement noise is considered, and the noise effective approach is presented, which lead to good estimate of rotational FRF. The proposed method is applied to estimate cross FRFs of a car body. A new T-square-block (T2-block) for measurement of six DOFs (three DOFs in translation and three DOFs in rotation) is designed. Two T2-blocks are attached to the measurement points of the sub frame of a passenger car: the T2-blocks are excited by the impact hammer, respectively; and cross FRFs of the car body are obtained. The validity of the method is investigated by comparing the experimental model and the FE model. The estimated rotational FRFs of car body are used for structure synthesis approach.

元の言語English
ホスト出版物のタイトルProceedings of the 2002 International Conference on Noise and Vibration Engineering, ISMA
編集者P. Sas, B. Hal
ページ2271-2279
ページ数9
出版物ステータスPublished - 2002 12 1
外部発表Yes
イベントProceedings of the 2002 International Conference on Noise and Vibration Engineering, ISMA - Leuven, Belgium
継続期間: 2002 9 162002 9 18

出版物シリーズ

名前Proceedings of the 2002 International Conference on Noise and Vibration Engineering, ISMA

Conference

ConferenceProceedings of the 2002 International Conference on Noise and Vibration Engineering, ISMA
Belgium
Leuven
期間02/9/1602/9/18

ASJC Scopus subject areas

  • Engineering(all)

これを引用

Hosoya, N., & Yoshimura, T. (2002). FRF measurement of rotational DOFs by T-block approach (improvement of accuracy for random noise and application to a car body). : P. Sas, & B. Hal (版), Proceedings of the 2002 International Conference on Noise and Vibration Engineering, ISMA (pp. 2271-2279). (Proceedings of the 2002 International Conference on Noise and Vibration Engineering, ISMA).