Granular modeling for powder-binder compound characterization in powder injection molding

Tatsuhiko Aizawa, Takashi Iwai

研究成果: Article査読

抄録

New granular modeling is proposed to deal with the powder morphology. The simple shear viscosity testing is utilized to computationally measure the variation of relative viscosity with increasing shear strain or solid loading ratio of particles. Abrupt increase of non-newtonian viscosity with increasing the loading ratio has close relationship with the forced orientation of irregularly-shaped particles. This interparticle interaction reveals on the effect of powder morphology on the actual viscous behavior of the powder-binder compound in the powder injection molding.

本文言語English
ページ(範囲)183-188
ページ数6
ジャーナルAmerican Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED
246
出版ステータスPublished - 1998 12 1

ASJC Scopus subject areas

  • 工学(全般)

フィンガープリント

「Granular modeling for powder-binder compound characterization in powder injection molding」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル