Granular modeling for powder-forming process simulation

T. Aizawa

研究成果: Article

抄録

It is now possible to experimentally determine a constitutive equation that describes stresses and strain rates relation and to make use of analytical techniques based on the approximation to porous bodies. However, there is not one constitutive equation able to cover all states of granular materials. Process conditions strongly depend on the particle size distribution of a granular material, and on the mean size and properties of a binder. In this case, the granular modeling technique becomes indispensable. In forming of granular magnetic materials, it becomes necessary to consider the interaction between the granular material and a magnetic field. This work presents a discussion of the granular modeling technique applied to the powder forming process. The results of some past studies are discussed. (from Author)

元の言語English
ページ(範囲)1401-1412
ページ数12
ジャーナルJapanese Journal of Tribology
38
発行部数11
出版物ステータスPublished - 1993
外部発表Yes

Fingerprint

Granular materials
Powders
Constitutive equations
Magnetic materials
Particle size analysis
Binders
Strain rate
Magnetic fields

ASJC Scopus subject areas

  • Mechanical Engineering

これを引用

Granular modeling for powder-forming process simulation. / Aizawa, T.

:: Japanese Journal of Tribology, 巻 38, 番号 11, 1993, p. 1401-1412.

研究成果: Article

Aizawa, T 1993, 'Granular modeling for powder-forming process simulation', Japanese Journal of Tribology, 巻. 38, 番号 11, pp. 1401-1412.
Aizawa, T. / Granular modeling for powder-forming process simulation. :: Japanese Journal of Tribology. 1993 ; 巻 38, 番号 11. pp. 1401-1412.
@article{ffeb86ce350f40299cab8ce41f420584,
title = "Granular modeling for powder-forming process simulation",
abstract = "It is now possible to experimentally determine a constitutive equation that describes stresses and strain rates relation and to make use of analytical techniques based on the approximation to porous bodies. However, there is not one constitutive equation able to cover all states of granular materials. Process conditions strongly depend on the particle size distribution of a granular material, and on the mean size and properties of a binder. In this case, the granular modeling technique becomes indispensable. In forming of granular magnetic materials, it becomes necessary to consider the interaction between the granular material and a magnetic field. This work presents a discussion of the granular modeling technique applied to the powder forming process. The results of some past studies are discussed. (from Author)",
author = "T. Aizawa",
year = "1993",
language = "English",
volume = "38",
pages = "1401--1412",
journal = "Japanese Journal of Tribology",
issn = "1045-7828",
publisher = "Allerton Press Inc.",
number = "11",

}

TY - JOUR

T1 - Granular modeling for powder-forming process simulation

AU - Aizawa, T.

PY - 1993

Y1 - 1993

N2 - It is now possible to experimentally determine a constitutive equation that describes stresses and strain rates relation and to make use of analytical techniques based on the approximation to porous bodies. However, there is not one constitutive equation able to cover all states of granular materials. Process conditions strongly depend on the particle size distribution of a granular material, and on the mean size and properties of a binder. In this case, the granular modeling technique becomes indispensable. In forming of granular magnetic materials, it becomes necessary to consider the interaction between the granular material and a magnetic field. This work presents a discussion of the granular modeling technique applied to the powder forming process. The results of some past studies are discussed. (from Author)

AB - It is now possible to experimentally determine a constitutive equation that describes stresses and strain rates relation and to make use of analytical techniques based on the approximation to porous bodies. However, there is not one constitutive equation able to cover all states of granular materials. Process conditions strongly depend on the particle size distribution of a granular material, and on the mean size and properties of a binder. In this case, the granular modeling technique becomes indispensable. In forming of granular magnetic materials, it becomes necessary to consider the interaction between the granular material and a magnetic field. This work presents a discussion of the granular modeling technique applied to the powder forming process. The results of some past studies are discussed. (from Author)

UR - http://www.scopus.com/inward/record.url?scp=0027528306&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0027528306&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:0027528306

VL - 38

SP - 1401

EP - 1412

JO - Japanese Journal of Tribology

JF - Japanese Journal of Tribology

SN - 1045-7828

IS - 11

ER -