Hemispherical breathing mode speaker using a dielectric elastomer actuator

研究成果: Article

21 引用 (Scopus)

抜粋

Although indoor acoustic characteristics should ideally be assessed by measuring the reverberation time using a point sound source, a regular polyhedron loudspeaker, which has multiple loudspeakers on a chassis, is typically used. However, such a configuration is not a point sound source if the size of the loudspeaker is large relative to the target sound field. This study investigates a small lightweight loudspeaker using a dielectric elastomer actuator vibrating in the breathing mode (the pulsating mode such as the expansion and contraction of a balloon). Acoustic testing with regard to repeatability, sound pressure, vibration mode profiles, and acoustic radiation patterns indicate that dielectric elastomer loudspeakers may be feasible.

元の言語English
ページ(範囲)EL424-EL428
ジャーナルJournal of the Acoustical Society of America
138
発行部数4
DOI
出版物ステータスPublished - 2015 10 1

ASJC Scopus subject areas

  • Acoustics and Ultrasonics
  • Arts and Humanities (miscellaneous)

フィンガープリント Hemispherical breathing mode speaker using a dielectric elastomer actuator' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用