High performance production of Bi 2Te 3 based thermoelectric materials on the route of the bulk mechanical alloying method

Yasushi Iwaisako, Tatsuhiko Aizawa, Atsushi Yamamoto, Toshitaka Ohta

研究成果: Conference contribution

抄録

In the commercial fabrication of thermoelectric materials, melting, ingot-making, pulverizing and sintering are fundamental steps for production. In the present new-production method on the route of bulk mechanical alloying, the elemental constituent granules or agglomerates with any selected composition can be used for direct solid-state synthesis into single or dual phase thermoelectric materials. Bi-Te-Sb system is adopted as the targeting thermoelectric materials to investigate the effect of fine-grained structure on the figure of merit. In addition, temperature and pressure conditions in hot pressing are widely varied to describe the effect of process parameters on the thermoelectric properties. As a rough sketch of high performance in this processing, 3.6 ks for fabrication of green compact with the relative density of 85% T.D., 3.6 ks for hot pressing to have fine grain size in 1 approximately 2 μm for high density of 99% T.D. or more, and Z = 3.15×10 -3/K in p-type Bi-Te system for the highest figure of merit.

元の言語English
ホスト出版物のタイトルInternational Conference on Thermoelectrics, ICT, Proceedings
出版者IEEE
ページ234-237
ページ数4
出版物ステータスPublished - 1999
外部発表Yes
イベント18th International Conference on Thermoelectrics (ICT'99) - Baltimore, MD, USA
継続期間: 1999 8 291999 9 2

Other

Other18th International Conference on Thermoelectrics (ICT'99)
Baltimore, MD, USA
期間99/8/2999/9/2

Fingerprint

Mechanical alloying
Hot pressing
Fabrication
Ingots
Melting
Sintering
Processing
Chemical analysis
Temperature

ASJC Scopus subject areas

  • Engineering(all)

これを引用

Iwaisako, Y., Aizawa, T., Yamamoto, A., & Ohta, T. (1999). High performance production of Bi 2Te 3 based thermoelectric materials on the route of the bulk mechanical alloying method International Conference on Thermoelectrics, ICT, Proceedings (pp. 234-237). IEEE.

High performance production of Bi 2Te 3 based thermoelectric materials on the route of the bulk mechanical alloying method . / Iwaisako, Yasushi; Aizawa, Tatsuhiko; Yamamoto, Atsushi; Ohta, Toshitaka.

International Conference on Thermoelectrics, ICT, Proceedings. IEEE, 1999. p. 234-237.

研究成果: Conference contribution

Iwaisako, Y, Aizawa, T, Yamamoto, A & Ohta, T 1999, High performance production of Bi 2Te 3 based thermoelectric materials on the route of the bulk mechanical alloying method International Conference on Thermoelectrics, ICT, Proceedings. IEEE, pp. 234-237, 18th International Conference on Thermoelectrics (ICT'99), Baltimore, MD, USA, 99/8/29.
Iwaisako Y, Aizawa T, Yamamoto A, Ohta T. High performance production of Bi 2Te 3 based thermoelectric materials on the route of the bulk mechanical alloying method : International Conference on Thermoelectrics, ICT, Proceedings. IEEE. 1999. p. 234-237
Iwaisako, Yasushi ; Aizawa, Tatsuhiko ; Yamamoto, Atsushi ; Ohta, Toshitaka. / High performance production of Bi 2Te 3 based thermoelectric materials on the route of the bulk mechanical alloying method International Conference on Thermoelectrics, ICT, Proceedings. IEEE, 1999. pp. 234-237
@inproceedings{43aa9af2ca7042a0b116025bbafa50c1,
title = "High performance production of Bi 2Te 3 based thermoelectric materials on the route of the bulk mechanical alloying method",
abstract = "In the commercial fabrication of thermoelectric materials, melting, ingot-making, pulverizing and sintering are fundamental steps for production. In the present new-production method on the route of bulk mechanical alloying, the elemental constituent granules or agglomerates with any selected composition can be used for direct solid-state synthesis into single or dual phase thermoelectric materials. Bi-Te-Sb system is adopted as the targeting thermoelectric materials to investigate the effect of fine-grained structure on the figure of merit. In addition, temperature and pressure conditions in hot pressing are widely varied to describe the effect of process parameters on the thermoelectric properties. As a rough sketch of high performance in this processing, 3.6 ks for fabrication of green compact with the relative density of 85{\%} T.D., 3.6 ks for hot pressing to have fine grain size in 1 approximately 2 μm for high density of 99{\%} T.D. or more, and Z = 3.15×10 -3/K in p-type Bi-Te system for the highest figure of merit.",
author = "Yasushi Iwaisako and Tatsuhiko Aizawa and Atsushi Yamamoto and Toshitaka Ohta",
year = "1999",
language = "English",
pages = "234--237",
booktitle = "International Conference on Thermoelectrics, ICT, Proceedings",
publisher = "IEEE",

}

TY - GEN

T1 - High performance production of Bi 2Te 3 based thermoelectric materials on the route of the bulk mechanical alloying method

AU - Iwaisako, Yasushi

AU - Aizawa, Tatsuhiko

AU - Yamamoto, Atsushi

AU - Ohta, Toshitaka

PY - 1999

Y1 - 1999

N2 - In the commercial fabrication of thermoelectric materials, melting, ingot-making, pulverizing and sintering are fundamental steps for production. In the present new-production method on the route of bulk mechanical alloying, the elemental constituent granules or agglomerates with any selected composition can be used for direct solid-state synthesis into single or dual phase thermoelectric materials. Bi-Te-Sb system is adopted as the targeting thermoelectric materials to investigate the effect of fine-grained structure on the figure of merit. In addition, temperature and pressure conditions in hot pressing are widely varied to describe the effect of process parameters on the thermoelectric properties. As a rough sketch of high performance in this processing, 3.6 ks for fabrication of green compact with the relative density of 85% T.D., 3.6 ks for hot pressing to have fine grain size in 1 approximately 2 μm for high density of 99% T.D. or more, and Z = 3.15×10 -3/K in p-type Bi-Te system for the highest figure of merit.

AB - In the commercial fabrication of thermoelectric materials, melting, ingot-making, pulverizing and sintering are fundamental steps for production. In the present new-production method on the route of bulk mechanical alloying, the elemental constituent granules or agglomerates with any selected composition can be used for direct solid-state synthesis into single or dual phase thermoelectric materials. Bi-Te-Sb system is adopted as the targeting thermoelectric materials to investigate the effect of fine-grained structure on the figure of merit. In addition, temperature and pressure conditions in hot pressing are widely varied to describe the effect of process parameters on the thermoelectric properties. As a rough sketch of high performance in this processing, 3.6 ks for fabrication of green compact with the relative density of 85% T.D., 3.6 ks for hot pressing to have fine grain size in 1 approximately 2 μm for high density of 99% T.D. or more, and Z = 3.15×10 -3/K in p-type Bi-Te system for the highest figure of merit.

UR - http://www.scopus.com/inward/record.url?scp=0033300944&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0033300944&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:0033300944

SP - 234

EP - 237

BT - International Conference on Thermoelectrics, ICT, Proceedings

PB - IEEE

ER -