High speed machining: A review from a viewpoint of chip formation

Toshiyuki Obikawa, Masahiro Anzai, Tsuneo Egawa, Norihiko Narutaki, Kazuhiro Shintani, Etsuo Takeoka

研究成果: Conference contribution

9 引用 (Scopus)

抄録

This paper describes strong nonlinearity in log V-log L relationship, which is often found in machining of supperalloys, titanium alloys, hardened steels, cast irons, etc. The nonlinearity plays an important and favorable role in extension of life-span cutting distance at higher cutting speeds; that is, in a certain range of cutting speed, life-span cutting distance increases with cutting speed. Results of tool wear in a sliding test and cutting experiments, which showed the evidences of strong nonlinearity, were investigated and the mechanisms causing the nonlinearity were discussed.

元の言語English
ホスト出版物のタイトルAdvanced Materials Research
ページ578-583
ページ数6
188
DOI
出版物ステータスPublished - 2011
イベント4th International Conference on High Speed Machining, ICHSM2010 - Guangzhou
継続期間: 2010 10 92010 10 10

出版物シリーズ

名前Advanced Materials Research
188
ISSN(印刷物)10226680

Other

Other4th International Conference on High Speed Machining, ICHSM2010
Guangzhou
期間10/10/910/10/10

Fingerprint

Machining
Alloy steel
Cast iron
Titanium alloys
Wear of materials
Experiments

ASJC Scopus subject areas

  • Engineering(all)

これを引用

Obikawa, T., Anzai, M., Egawa, T., Narutaki, N., Shintani, K., & Takeoka, E. (2011). High speed machining: A review from a viewpoint of chip formation. : Advanced Materials Research (巻 188, pp. 578-583). (Advanced Materials Research; 巻数 188). https://doi.org/10.4028/www.scientific.net/AMR.188.578

High speed machining : A review from a viewpoint of chip formation. / Obikawa, Toshiyuki; Anzai, Masahiro; Egawa, Tsuneo; Narutaki, Norihiko; Shintani, Kazuhiro; Takeoka, Etsuo.

Advanced Materials Research. 巻 188 2011. p. 578-583 (Advanced Materials Research; 巻 188).

研究成果: Conference contribution

Obikawa, T, Anzai, M, Egawa, T, Narutaki, N, Shintani, K & Takeoka, E 2011, High speed machining: A review from a viewpoint of chip formation. : Advanced Materials Research. 巻. 188, Advanced Materials Research, 巻. 188, pp. 578-583, 4th International Conference on High Speed Machining, ICHSM2010, Guangzhou, 10/10/9. https://doi.org/10.4028/www.scientific.net/AMR.188.578
Obikawa T, Anzai M, Egawa T, Narutaki N, Shintani K, Takeoka E. High speed machining: A review from a viewpoint of chip formation. : Advanced Materials Research. 巻 188. 2011. p. 578-583. (Advanced Materials Research). https://doi.org/10.4028/www.scientific.net/AMR.188.578
Obikawa, Toshiyuki ; Anzai, Masahiro ; Egawa, Tsuneo ; Narutaki, Norihiko ; Shintani, Kazuhiro ; Takeoka, Etsuo. / High speed machining : A review from a viewpoint of chip formation. Advanced Materials Research. 巻 188 2011. pp. 578-583 (Advanced Materials Research).
@inproceedings{25b212c5a5244ab092c77381af8b198e,
title = "High speed machining: A review from a viewpoint of chip formation",
abstract = "This paper describes strong nonlinearity in log V-log L relationship, which is often found in machining of supperalloys, titanium alloys, hardened steels, cast irons, etc. The nonlinearity plays an important and favorable role in extension of life-span cutting distance at higher cutting speeds; that is, in a certain range of cutting speed, life-span cutting distance increases with cutting speed. Results of tool wear in a sliding test and cutting experiments, which showed the evidences of strong nonlinearity, were investigated and the mechanisms causing the nonlinearity were discussed.",
keywords = "High speed machining, Life-span cutting distance, Machinability improvement, Tool life",
author = "Toshiyuki Obikawa and Masahiro Anzai and Tsuneo Egawa and Norihiko Narutaki and Kazuhiro Shintani and Etsuo Takeoka",
year = "2011",
doi = "10.4028/www.scientific.net/AMR.188.578",
language = "English",
isbn = "9783037850671",
volume = "188",
series = "Advanced Materials Research",
pages = "578--583",
booktitle = "Advanced Materials Research",

}

TY - GEN

T1 - High speed machining

T2 - A review from a viewpoint of chip formation

AU - Obikawa, Toshiyuki

AU - Anzai, Masahiro

AU - Egawa, Tsuneo

AU - Narutaki, Norihiko

AU - Shintani, Kazuhiro

AU - Takeoka, Etsuo

PY - 2011

Y1 - 2011

N2 - This paper describes strong nonlinearity in log V-log L relationship, which is often found in machining of supperalloys, titanium alloys, hardened steels, cast irons, etc. The nonlinearity plays an important and favorable role in extension of life-span cutting distance at higher cutting speeds; that is, in a certain range of cutting speed, life-span cutting distance increases with cutting speed. Results of tool wear in a sliding test and cutting experiments, which showed the evidences of strong nonlinearity, were investigated and the mechanisms causing the nonlinearity were discussed.

AB - This paper describes strong nonlinearity in log V-log L relationship, which is often found in machining of supperalloys, titanium alloys, hardened steels, cast irons, etc. The nonlinearity plays an important and favorable role in extension of life-span cutting distance at higher cutting speeds; that is, in a certain range of cutting speed, life-span cutting distance increases with cutting speed. Results of tool wear in a sliding test and cutting experiments, which showed the evidences of strong nonlinearity, were investigated and the mechanisms causing the nonlinearity were discussed.

KW - High speed machining

KW - Life-span cutting distance

KW - Machinability improvement

KW - Tool life

UR - http://www.scopus.com/inward/record.url?scp=79955709405&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=79955709405&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/AMR.188.578

DO - 10.4028/www.scientific.net/AMR.188.578

M3 - Conference contribution

AN - SCOPUS:79955709405

SN - 9783037850671

VL - 188

T3 - Advanced Materials Research

SP - 578

EP - 583

BT - Advanced Materials Research

ER -