Hydrogenation treatment under several gigapascals assists diffusionless transformation in a face-centered cubic steel

Motomichi Koyama, Hiroyuki Saitoh, Toyoto Sato, Shin ichi Orimo, Eiji Akiyama

研究成果査読

抄録

The use of hydrogen in iron and steel has the potential to improve mechanical properties via altering the phase stability and dislocation behavior. When hydrogen is introduced under several gigapascals, a stoichiometric composition of hydrogen can be introduced for steel compositions. In this study, a face-centered cubic (fcc) stainless steel was hydrogenated under several gigapascals. When the steel was not hydrogenated, the microstructure after depressurization was an fcc with a hexagonal close-packed (hcp) structure. In contrast, the hydrogenation treatment resulted in a fine lath body-centered cubic (bcc) structure arising from diffusionless transformation. In particular, the bcc phase formed through the following transformation sequence: fcc → hcp → dhcp (double hexagonal close-packed phase) → bcc. That is, the use of hydrogenation treatment realized fine microstructure evolution through a new type of diffusionless transformation sequence, which is expected to be used in future alloy design strategies for developing high-strength steels.

本文言語English
論文番号19384
ジャーナルScientific Reports
11
1
DOI
出版ステータスPublished - 2021 12

ASJC Scopus subject areas

  • 一般

フィンガープリント

「Hydrogenation treatment under several gigapascals assists diffusionless transformation in a face-centered cubic steel」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル