Influence of powder composition and milling media on the formation of molybdenum disilicide by a mechanically induced self-propagating reaction

Bing K. Yen, Tatsuhiko Aizawa, Junji Kihara

研究成果: Article

36 引用 (Scopus)

抜粋

The spontaneous formation of molybdenum disilicide (α-MoSi2) during the mechanical alloying of a stoichiometric Mo-Si powder mixture occurred by a mechanically induced self-propagating reaction (MSR) - a mechanism similar to that of the thermally ignited self-propagating high-temperature synthesis (SHS). The bulk of α-MoSi2 formation occurred in less than 15 min once the reaction commenced after 14 h, 15 min of milling. When the milling media was switched from zirconia to steel, however, the reaction rate became sluggish as both the α and β phases were formed. The mechanical alloying of the Si-rich and Si-poor compositions was also characterized by the gradual formation of α and β phases.

元の言語English
ページ(範囲)2221-2223
ページ数3
ジャーナルJournal of the American Ceramic Society
79
発行部数8
DOI
出版物ステータスPublished - 1996 8

ASJC Scopus subject areas

  • Ceramics and Composites
  • Materials Chemistry

フィンガープリント Influence of powder composition and milling media on the formation of molybdenum disilicide by a mechanically induced self-propagating reaction' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用