Interaction of molten Armco iron with various ceramic substrates at 1600 °C

Xingwen Wei, Steffen Dudczig, Enrico Storti, Mariia Ilatovskaia, Rie Endo, Christos G. Aneziris, Olena Volkova

研究成果: Article査読

2 被引用数 (Scopus)

抄録

Ceramic substrates (Al2O3·MgO, CA6, CaZrO3, AZT (Al2O3 based substrates containing ZrO2 and TiO2)) were interacted with liquid Armco iron under a low oxygen partial pressure in the heating microscope. No noticeable dissolution of the ceramic substrates and reaction was observed for most of the substrates. Furthermore, deposition of SiO2 and Fe was found on the cross section between iron and these substrates. However, for the substrate AZT, a reaction layer of complex composition was found on the interface between the iron sample and the AZT substrate. After all experiments, the total number of inclusions in the iron samples greatly decreased. The deposition, agglomeration of inclusions, and the evaporation of some elements were the factors for the inclusions decreasing. Furthermore, the stability of oxides consisted of substrates under low oxygen partial pressure was confirmed by the thermodynamic calculation.

本文言語English
ページ(範囲)2535-2544
ページ数10
ジャーナルJournal of the European Ceramic Society
42
5
DOI
出版ステータスPublished - 2022 5月
外部発表はい

ASJC Scopus subject areas

  • セラミックおよび複合材料
  • 材料化学

フィンガープリント

「Interaction of molten Armco iron with various ceramic substrates at 1600 °C」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル