Linear voltage-to-current converters with current reuse technique

Retdian Nicodimus, Daisuke Horii, Shigetaka Takagi

研究成果: Article

2 引用 (Scopus)

抄録

This paper proposes a linear voltage-to-cur-rent converter with current reuse technique to reduce circuit power consumption without deteriorating its linearity and bandwidth. The proposed circuit is designed using 0.18 μm CMOS process parameters from TSMC. Simulation results show that the total harmonic distortion (THD) of the proposed circuit with a 2.5-V input amplitude is less than 1% for input frequency up to 200 MHz under a 1.8-V supply voltage. The total current consumption is 10.8 mA.

元の言語English
ページ(範囲)549-556
ページ数8
ジャーナルAnalog Integrated Circuits and Signal Processing
72
発行部数3
DOI
出版物ステータスPublished - 2012 9
外部発表Yes

Fingerprint

Networks (circuits)
Electric potential
Harmonic distortion
Electric power utilization
Bandwidth

ASJC Scopus subject areas

  • Surfaces, Coatings and Films
  • Hardware and Architecture
  • Signal Processing

これを引用

Linear voltage-to-current converters with current reuse technique. / Nicodimus, Retdian; Horii, Daisuke; Takagi, Shigetaka.

:: Analog Integrated Circuits and Signal Processing, 巻 72, 番号 3, 09.2012, p. 549-556.

研究成果: Article

@article{6a038ddd307a4841bed1a6dbf782fa31,
title = "Linear voltage-to-current converters with current reuse technique",
abstract = "This paper proposes a linear voltage-to-cur-rent converter with current reuse technique to reduce circuit power consumption without deteriorating its linearity and bandwidth. The proposed circuit is designed using 0.18 μm CMOS process parameters from TSMC. Simulation results show that the total harmonic distortion (THD) of the proposed circuit with a 2.5-V input amplitude is less than 1{\%} for input frequency up to 200 MHz under a 1.8-V supply voltage. The total current consumption is 10.8 mA.",
keywords = "Current reuse, Flipped voltage follower, Voltage attenuator, Voltage-to-current converters",
author = "Retdian Nicodimus and Daisuke Horii and Shigetaka Takagi",
year = "2012",
month = "9",
doi = "10.1007/s10470-011-9665-y",
language = "English",
volume = "72",
pages = "549--556",
journal = "Analog Integrated Circuits and Signal Processing",
issn = "0925-1030",
publisher = "Springer Netherlands",
number = "3",

}

TY - JOUR

T1 - Linear voltage-to-current converters with current reuse technique

AU - Nicodimus, Retdian

AU - Horii, Daisuke

AU - Takagi, Shigetaka

PY - 2012/9

Y1 - 2012/9

N2 - This paper proposes a linear voltage-to-cur-rent converter with current reuse technique to reduce circuit power consumption without deteriorating its linearity and bandwidth. The proposed circuit is designed using 0.18 μm CMOS process parameters from TSMC. Simulation results show that the total harmonic distortion (THD) of the proposed circuit with a 2.5-V input amplitude is less than 1% for input frequency up to 200 MHz under a 1.8-V supply voltage. The total current consumption is 10.8 mA.

AB - This paper proposes a linear voltage-to-cur-rent converter with current reuse technique to reduce circuit power consumption without deteriorating its linearity and bandwidth. The proposed circuit is designed using 0.18 μm CMOS process parameters from TSMC. Simulation results show that the total harmonic distortion (THD) of the proposed circuit with a 2.5-V input amplitude is less than 1% for input frequency up to 200 MHz under a 1.8-V supply voltage. The total current consumption is 10.8 mA.

KW - Current reuse

KW - Flipped voltage follower

KW - Voltage attenuator

KW - Voltage-to-current converters

UR - http://www.scopus.com/inward/record.url?scp=84865131460&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84865131460&partnerID=8YFLogxK

U2 - 10.1007/s10470-011-9665-y

DO - 10.1007/s10470-011-9665-y

M3 - Article

AN - SCOPUS:84865131460

VL - 72

SP - 549

EP - 556

JO - Analog Integrated Circuits and Signal Processing

JF - Analog Integrated Circuits and Signal Processing

SN - 0925-1030

IS - 3

ER -