Local quenching phenomena of a lean premixed flat flame impinging with a pulsating air jet

Y. Yahagi, I. Makino

研究成果: Conference article

1 引用 (Scopus)

抜粋

Local quenching phenomena of a lean methane air premixed flat flame formed horizontally in a wall stagnating flow impinging with a pulsating air jet has been investigated experimentally. The burner system consists of 40mm inverted nozzle burner and a solid wall with 8mm diameter air jet placed in line vertically. The pulsating frequencies set up to 100Hz while the jet intensities generate up to 6 m/s by a loud speaker. Approximately '00mm disk shape flame front is curved by the pulsating air jet and the air jet impacting point is locally quenched. The fuel concentration of quenching start condition increases with increasing the intensity of air jet, because the increased jet intensity linked with the flame strain rate gain. For weak jet intensity range, the quenching hole becomes directly to develop the whole flame extinction. On the other hand, for moderate or strong jet condition, the flame can recover from the local quenching phenomena. In this condition, once the quenching hole creates, but the hole may close by the flame propagation or reigniting process. Then, the whole flame extinction limits are lower than no jet impacting condition depending on the circumstances.

元の言語English
記事番号012013
ジャーナルJournal of Physics: Conference Series
530
発行部数1
DOI
出版物ステータスPublished - 2014 1 1
イベント21st Fluid Mechanics Conference, FMC 2014 - Krakow, Poland
継続期間: 2014 6 152014 6 18

ASJC Scopus subject areas

  • Physics and Astronomy(all)

フィンガープリント Local quenching phenomena of a lean premixed flat flame impinging with a pulsating air jet' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用