Magnetic abrasive finishing of WC-Co curved surfaces

M. Anzai, E. Kawashima, H. Otaki, T. Nakagawa

研究成果: Chapter

2 被引用数 (Scopus)

抄録

Most of mold manufacturing procedures have been automated by the introduction of NC machine tools and CAD/CAM systems. But the surface finishing of the mold must be still done manually by well-skilled workers. Though many attempts were made to eliminate this hand work, automatic finishing of mold surface with 3-dimensional curvature has not been achieved yet. A new magnetic abrasive finishing process is proposed as a potential method for the automation of surface finishing. In order to improve the grindability of magnetic abrasive process for WC-Co alloys, a new magnetic abrasive and finishing procedure was developed. This magnetic abrasive and finishing procedure was experimentally confirmed to have a sufficient grindability to finish EDMed surface of WC-Co alloys into mirror surfaces. This magnetic abrasive finishing may contribute to the automatic finishing of WC-Co alloy.

本文言語English
ホスト出版物のタイトルNIST Special Publication
出版社Publ by Natl Inst of Standards & Technology
ページ415-422
ページ数8
847
出版ステータスPublished - 1993 6 1
外部発表はい
イベントProceedings of the International Conference on Machining of Advanced Materials - Gaithersburg, MD, USA
継続期間: 1993 7 201993 7 22

Other

OtherProceedings of the International Conference on Machining of Advanced Materials
CityGaithersburg, MD, USA
Period93/7/2093/7/22

ASJC Scopus subject areas

  • 工学(全般)

フィンガープリント

「Magnetic abrasive finishing of WC-Co curved surfaces」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル