Magnetic Readout Head Using Induced RF Permeability Variation in Ni-Fe Film

J. Akiyama, H. Iwasaki, S. Yatabe, S. Chiba

研究成果: Article査読

抄録

A novel principle of magnetic readout is proposed which can extract a high-quality output from high-density recorded signals. The principle utilizes sharp RF permeability changes in a soft magnetic film due to a weak external field. This variation is caused by both magnetization rotation and ferromagnetic resonance. A magnetic readout head which operates on this novel principle has been trial-fabricated. The prototype head was evaluated using sinusoidal signals (0.5 to 10 MHz) which were saturation-recorded on a magnetic tape with a ferrite ring head (head gap 0.3 µm, track width 100 µm). The signal level reproduced at 0.5 MHz by the prototype head was at least 35.7 dB higher than that from a ring head, and for 5-MHz signals the output was from 17.6 to 22.5 dB higher. The carrier-to-noise ratio for a 5 MHz carrier (1 µm wavelength) was from 44 to 4 7 dB, and was independent of the Ni-Fe film thickness.

本文言語English
ページ(範囲)297-303
ページ数7
ジャーナルIEEE Translation Journal on Magnetics in Japan
2
4
DOI
出版ステータスPublished - 1987 4

ASJC Scopus subject areas

  • 工学(その他)
  • 工学(全般)

フィンガープリント

「Magnetic Readout Head Using Induced RF Permeability Variation in Ni-Fe Film」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル