Measurement and numerical analysis of AC loss in high temperature superconducting coil

Satoshi Fukui, Makoto Shibayama, Jun Ogawa, Tetsuo Oka, Takao Sato, Tomoaki Takao, Osami Tsukamoto

研究成果: Article

3 引用 (Scopus)

抄録

The paper reports on experimental and numerical studies of AC loss in a high temperature superconducting coil wound with a Bi2223/Ag tape. A measurement method of the AC loss in the HTS coil by using a power meter is proposed. The AC loss is measured on the test HTS coil made by stacking pancake coils wound with the Bi2223/Ag tape. The AC loss is also calculated using the numerical method developed in our previous work. The measured AC loss is compared with the calculated one. The agreement of measured and calculated data is reasonable and this shows the validity of the proposed measurement method.

元の言語English
記事番号4704904
ジャーナルIEEE Transactions on Applied Superconductivity
22
発行部数3
DOI
出版物ステータスPublished - 2012 6 25
外部発表Yes

Fingerprint

numerical analysis
Numerical analysis
alternating current
coils
Tapes
tapes
Temperature
Numerical methods
Superconducting coils

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics
  • Electrical and Electronic Engineering

これを引用

Measurement and numerical analysis of AC loss in high temperature superconducting coil. / Fukui, Satoshi; Shibayama, Makoto; Ogawa, Jun; Oka, Tetsuo; Sato, Takao; Takao, Tomoaki; Tsukamoto, Osami.

:: IEEE Transactions on Applied Superconductivity, 巻 22, 番号 3, 4704904, 25.06.2012.

研究成果: Article

Fukui, Satoshi ; Shibayama, Makoto ; Ogawa, Jun ; Oka, Tetsuo ; Sato, Takao ; Takao, Tomoaki ; Tsukamoto, Osami. / Measurement and numerical analysis of AC loss in high temperature superconducting coil. :: IEEE Transactions on Applied Superconductivity. 2012 ; 巻 22, 番号 3.
@article{c1fc242923d5433e9313b1943bee009f,
title = "Measurement and numerical analysis of AC loss in high temperature superconducting coil",
abstract = "The paper reports on experimental and numerical studies of AC loss in a high temperature superconducting coil wound with a Bi2223/Ag tape. A measurement method of the AC loss in the HTS coil by using a power meter is proposed. The AC loss is measured on the test HTS coil made by stacking pancake coils wound with the Bi2223/Ag tape. The AC loss is also calculated using the numerical method developed in our previous work. The measured AC loss is compared with the calculated one. The agreement of measured and calculated data is reasonable and this shows the validity of the proposed measurement method.",
keywords = "AC loss, AC loss measurement, Bi-2223, HTS coil",
author = "Satoshi Fukui and Makoto Shibayama and Jun Ogawa and Tetsuo Oka and Takao Sato and Tomoaki Takao and Osami Tsukamoto",
year = "2012",
month = "6",
day = "25",
doi = "10.1109/TASC.2011.2175684",
language = "English",
volume = "22",
journal = "IEEE Transactions on Applied Superconductivity",
issn = "1051-8223",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
number = "3",

}

TY - JOUR

T1 - Measurement and numerical analysis of AC loss in high temperature superconducting coil

AU - Fukui, Satoshi

AU - Shibayama, Makoto

AU - Ogawa, Jun

AU - Oka, Tetsuo

AU - Sato, Takao

AU - Takao, Tomoaki

AU - Tsukamoto, Osami

PY - 2012/6/25

Y1 - 2012/6/25

N2 - The paper reports on experimental and numerical studies of AC loss in a high temperature superconducting coil wound with a Bi2223/Ag tape. A measurement method of the AC loss in the HTS coil by using a power meter is proposed. The AC loss is measured on the test HTS coil made by stacking pancake coils wound with the Bi2223/Ag tape. The AC loss is also calculated using the numerical method developed in our previous work. The measured AC loss is compared with the calculated one. The agreement of measured and calculated data is reasonable and this shows the validity of the proposed measurement method.

AB - The paper reports on experimental and numerical studies of AC loss in a high temperature superconducting coil wound with a Bi2223/Ag tape. A measurement method of the AC loss in the HTS coil by using a power meter is proposed. The AC loss is measured on the test HTS coil made by stacking pancake coils wound with the Bi2223/Ag tape. The AC loss is also calculated using the numerical method developed in our previous work. The measured AC loss is compared with the calculated one. The agreement of measured and calculated data is reasonable and this shows the validity of the proposed measurement method.

KW - AC loss

KW - AC loss measurement

KW - Bi-2223

KW - HTS coil

UR - http://www.scopus.com/inward/record.url?scp=84862561986&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84862561986&partnerID=8YFLogxK

U2 - 10.1109/TASC.2011.2175684

DO - 10.1109/TASC.2011.2175684

M3 - Article

AN - SCOPUS:84862561986

VL - 22

JO - IEEE Transactions on Applied Superconductivity

JF - IEEE Transactions on Applied Superconductivity

SN - 1051-8223

IS - 3

M1 - 4704904

ER -