Microstructure and properties of superconducting, ferromagnetic and hybrid nanowire networks of La1.85Sr0.15CuO4 and La0.5Sr0.5MnO3

M. R. Koblischka, A. Koblischka-Veneva, X. L. Zeng, T. Karwoth

研究成果: Conference article査読

抄録

We have successfully fabricated La1-xSrxMnO3 (LSMO) nanowires with various x level, and La1.85Sr0.15CuO4 (LSCO) nanowires/nanoribbons via electrospinning. The colossal magnetoresistance (CMR) of the LSMO nanowire networks have been investigated. and the Tc of the LSCO nanowires and nanoribbons are around 19.2 K and 29.3 K respectively. Furthermore, we have established a LSCO/LSMO nanowire hybrid system. From obervation by scanning electron microscopy, the average diameter of the nanowires is around 220 nm and the average length can reach over 50 μmm. The randomly aligned LSCO and LSMO nanowires show numerous connections and form a complicated hybrid network system. The nanowires are polycrystalline with the grain size of ∼30 nm as confirmed by transmission electron microscopy and EBSD. According to four-probe electrical transportation measurements, the superconductivity of the hybrid sample is suppressed and an anti-magnetoresistance effect is observed. SQUID measurements of M(T) and M(H) were carried out as well, revealing the soft magnetic character of the nanowires.

本文言語English
論文番号012028
ジャーナルIOP Conference Series: Materials Science and Engineering
625
1
DOI
出版ステータスPublished - 2019 9 30
イベント2019 3rd International Conference on Materials Engineering and Nano Sciences, ICMENS 2019 - Hiroshima, Japan
継続期間: 2019 3 262019 3 28

ASJC Scopus subject areas

  • Materials Science(all)
  • Engineering(all)

フィンガープリント 「Microstructure and properties of superconducting, ferromagnetic and hybrid nanowire networks of La<sub>1.85</sub>Sr<sub>0.15</sub>CuO<sub>4</sub> and La<sub>0.5</sub>Sr<sub>0.5</sub>MnO<sub>3</sub>」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル